Materials and Corrosion

Cover image for Vol. 63 Issue 3

March 2012

Volume 63, Issue 3

Pages 191–282

  1. Cover Picture

    1. Top of page
    2. Cover Picture
    3. Contents
    4. Articles
    5. Corrosion News
    6. Korrosionsnachrichten
    1. Materials and Corrosion 3/2012

      A. Schönberger, S. Virtanen, V. Giese, H. Schröttner and C. Spießberger

      Version of Record online: 12 MAR 2012 | DOI: 10.1002/maco.201290008

      Cover: Grinding surface pattern of steel, coated with thick-film E-coat (40 μm) after a stone chipping defect exposed in an accelerated corrosion test (BMW AA-0224) showing blistering and a corrosion progress. The small image represents a cross section of the sample which was carried out on the FEI Nanolab Nova200 dual-beam focused ion beam (DB-FIB – FEI company, Eindhoven, The Netherlands). For the single wide cut (1350 μm by 30 μm) a beam current of 20nA at an acceleration voltage of 20kV was used. Afterwards the part in front of the cross section was removed manually with a scalpel blade. Additional ion beam cross section cleaning with 7nA at 20kV was performed and images were taken with the electron beam using the Everhart-Thornley detector at 52° tilt angle and an acceleration voltage of 5kV.

      Grinding surface pattern and analyzes were investigated at the Austrian Centre for Electron Microscopy and Nanoanalysis (ZFE-Graz), Graz-Austria, by Dr. J. Wagner.

      More detailed information can be found in: A. Schönberger, S. Virtanen, V. Giese, H. Schröttner, C. Spießberger, Non-destructive detection of corrosion applied to steel and galvanized steel coated with organic paints by the pulsed phase thermography, Materials and Corrosion 2012, 63, 195.

  2. Contents

    1. Top of page
    2. Cover Picture
    3. Contents
    4. Articles
    5. Corrosion News
    6. Korrosionsnachrichten
    1. Materials and Corrosion 3/2012 (pages 191–194)

      Version of Record online: 12 MAR 2012 | DOI: 10.1002/maco.201290009

  3. Articles

    1. Top of page
    2. Cover Picture
    3. Contents
    4. Articles
    5. Corrosion News
    6. Korrosionsnachrichten
    1. Influence of substrate composition on the formation of phytic acid conversion coatings (pages 215–222)

      X. Cui, G. Jin, E. Liu, M. Ding, Q. Li and F. Wang

      Version of Record online: 29 OCT 2010 | DOI: 10.1002/maco.201005686

    2. Corrosion in alkanolamine used for acid gas removal: From natural gas processing to CO2 capture (pages 223–230)

      J. Kittel, E. Fleury, B. Vuillemin, S. Gonzalez, F. Ropital and R. Oltra

      Version of Record online: 29 OCT 2010 | DOI: 10.1002/maco.201005847

    3. Effect of the deformation on the stress–corrosion cracking of Al–Zn–Mg–Cu alloys (pages 254–258)

      G. S. Peng, K. H. Chen, S. Y. Chen and H. C. Fang

      Version of Record online: 30 JUL 2010 | DOI: 10.1002/maco.201005732

    4. Effect of Sn addition on the corrosion behavior of Ti-Ta alloy (pages 259–263)

      B. Guo, Y. X. Tong, F. Chen, Y. F. Zheng, L. Li and C. Y. Chung

      Version of Record online: 21 SEP 2010 | DOI: 10.1002/maco.201005824

    5. Damage of stainless steel bars due to atmospheric corrosion (pages 264–270)

      A. Burkert, J. Lehmann, A. Burkert and J. Mietz

      Version of Record online: 16 AUG 2010 | DOI: 10.1002/maco.201005701

  4. Corrosion News

    1. Top of page
    2. Cover Picture
    3. Contents
    4. Articles
    5. Corrosion News
    6. Korrosionsnachrichten
    1. You have free access to this content
      Corrosion News (pages 271–282)

      Version of Record online: 12 MAR 2012 | DOI: 10.1002/maco.201290010

  5. Korrosionsnachrichten

    1. Top of page
    2. Cover Picture
    3. Contents
    4. Articles
    5. Corrosion News
    6. Korrosionsnachrichten
    1. You have free access to this content
      Korrosionsnachrichten

      Version of Record online: 12 MAR 2012 | DOI: 10.1002/maco.201290011

SEARCH

SEARCH BY CITATION