Materials and Corrosion

Cover image for Vol. 64 Issue 5

May 2013

Volume 64, Issue 5

Pages 367–462

  1. Cover Picture

    1. Top of page
    2. Cover Picture
    3. Contents
    4. Articles
    5. Corrosion News
    6. Korrosionsnachrichten
    1. You have free access to this content
      Materials and Corrosion 5/2013

      Version of Record online: 17 MAY 2013 | DOI: 10.1002/maco.201390016

      Cover:

      Corrosion rate and corrosion products characterization of reinforcing steel embedded in fly ash mortars with and without chloride was monitored using electrochemical techniques and Raman spectroscopy, respectively. After 720 days of experimentation the reinforcing steel embedded in fly ash mortar without chlorides remained passive, while the specimens in fly ash polluted with chloride ions (0.4% and 2%) yielded current density values of the order of 2 equation image A equation image, typical of an active state. The main corrosion products generated were iron oxyhydroxides hydrates in the light regions and goethite or lepidocrocite in the dark regions.

      More detailed information can be found in: M. Criado, S. Martínez-Ramirez, S. Fajardo, P. P. Gómez, J. M. Bastidas, Corrosion rate and corrosion product characterisation using Raman spectroscopy for steel embedded in chloride polluted fly ash mortar, Materials and Corrosion 2013, 64, 372.

  2. Contents

    1. Top of page
    2. Cover Picture
    3. Contents
    4. Articles
    5. Corrosion News
    6. Korrosionsnachrichten
    1. Materials and Corrosion 5/2013 (pages 367–371)

      Version of Record online: 17 MAY 2013 | DOI: 10.1002/maco.201390017

  3. Articles

    1. Top of page
    2. Cover Picture
    3. Contents
    4. Articles
    5. Corrosion News
    6. Korrosionsnachrichten
    1. Corrosion characterization of microarc oxidation coatings formed on Mg–7Li alloy (pages 426–432)

      J. G. Li, Y. Lv, H. W. Wang, Z. J. Zhu, Z. J. Wei and X. C. Meng

      Version of Record online: 20 MAR 2012 | DOI: 10.1002/maco.201106492

    2. Poly(3-octylthiophene) thermally treated as coating for corrosion protection of SS304 in sulfuric acid media (pages 439–445)

      U. León-Silva, M. E. Nicho, J. G. González-Rodríguez, J. G. Chacón-Nava and V. M. Salinas-Bravo

      Version of Record online: 16 MAY 2012 | DOI: 10.1002/maco.201206538

  4. Corrosion News

    1. Top of page
    2. Cover Picture
    3. Contents
    4. Articles
    5. Corrosion News
    6. Korrosionsnachrichten
    1. You have free access to this content
  5. Korrosionsnachrichten

    1. Top of page
    2. Cover Picture
    3. Contents
    4. Articles
    5. Corrosion News
    6. Korrosionsnachrichten
    1. You have free access to this content

SEARCH

SEARCH BY CITATION