Macromolecular Symposia

Cover image for Vol. 311 Issue 1

Special Issue: From Molecular Structure to Performance of Polymeric Materials

January 2012

Volume 311, Issue 1

Pages v–viii, 1–125

Issue edited by: Nicolai Aust, Johannes Karl Fink, Wolfgang Kern

  1. Cover Picture

    1. Top of page
    2. Cover Picture
    3. Masthead
    4. Contents
    5. Preface
    6. Articles
    1. Macromol. Symp. 311

      Article first published online: 25 JAN 2012 | DOI: 10.1002/masy.201290000

      Cover: 10th Austrian Polymer Meeting and 2nd Joint Austrian-Slovenian Polymer Meeting 2010 was held in Leoben, Austria, from September 8-10, 2011. The cover is selected from the article by M. Olbrich et.al. and shows a cross section of the axial velocity profile in the outflow domain of the mixing section.

  2. Masthead

    1. Top of page
    2. Cover Picture
    3. Masthead
    4. Contents
    5. Preface
    6. Articles
    1. Macromol. Symp. 311

      Article first published online: 25 JAN 2012 | DOI: 10.1002/masy.201290001

  3. Contents

    1. Top of page
    2. Cover Picture
    3. Masthead
    4. Contents
    5. Preface
    6. Articles
    1. Macromol. Symp. 311 (pages v–vii)

      Article first published online: 25 JAN 2012 | DOI: 10.1002/masy.201290002

  4. Preface

    1. Top of page
    2. Cover Picture
    3. Masthead
    4. Contents
    5. Preface
    6. Articles
    1. Preface (page viii)

      Nicolai Aust, Johannes Karl Fink and Wolfgang Kern

      Article first published online: 25 JAN 2012 | DOI: 10.1002/masy.201290003

  5. Articles

    1. Top of page
    2. Cover Picture
    3. Masthead
    4. Contents
    5. Preface
    6. Articles
    1. Numerical Simulation of Crack Growth in Polyethylene Composites by Means of the Cohesive Zone Model (pages 1–8)

      Marian Janko, Werner Ecker, Gerald Pinter and Otmar Kolednik

      Article first published online: 25 JAN 2012 | DOI: 10.1002/masy.201000140

    2. Contributions to the Characterization of Chlorinated Polyisoprene Surfaces (pages 9–17)

      Dietmar Lenko, Sandra Schlögl, Rebecca Kramer, Wolfgang Kern, Raimund Schaller and Armin Holzner

      Article first published online: 25 JAN 2012 | DOI: 10.1002/masy.201000136

    3. Synthesis and Characterization of a Bio-Based Resin from Linseed Oil (pages 18–27)

      Arunjunai Raj Mahendran, Nicolai Aust, Günter Wuzella and Andreas Kandelbauer

      Article first published online: 25 JAN 2012 | DOI: 10.1002/masy.201000134

    4. Adsorption of Laponite on a Cellulose Model Surface (pages 28–32)

      Gerald Findenig, Stefan Spirk, Martin Reischl, Rupert Kargl, Aleš Doliška, Karin Stana-Kleinschek and Volker Ribitsch

      Article first published online: 25 JAN 2012 | DOI: 10.1002/masy.201000127

    5. Effect of the Mixture Composition on Shear and Extensional Rheology of Recycled PET and ABS Nanocomposites (pages 33–40)

      Milan Kracalik, Stephan Laske, Andreas Witschnigg and Clemens Holzer

      Article first published online: 25 JAN 2012 | DOI: 10.1002/masy.201000122

    6. Modelling Monomer/Disc Composites Phase Behaviour (pages 49–56)

      Francisco Torrens, Clara M. Gómez, Isidro S. Monzó, Concepción Abad and Agustín Campos

      Article first published online: 25 JAN 2012 | DOI: 10.1002/masy.201000108

    7. Conductive Composites Based on Metallocene Isotactic Poly(propylene): Preparation and Properties (pages 64–69)

      Strashimir Djoumaliisky, Rosario Benavente, Georgi Kotzev, Vassil Vulchev, Ekaterina Krusteva and Rumen Krastev

      Article first published online: 25 JAN 2012 | DOI: 10.1002/masy.201000105

    8. Preparation and Thermal Characterization of PTFE/PES Nanocomposites (pages 70–76)

      Diego Antonioli, Michele Laus, Katia Sparnacci, Simone Deregibus, Valerj Kapeliouchko, Tiziana Poggio, Giampaolo Zuccheri, Rosita Passeri and Luca Boarino

      Article first published online: 25 JAN 2012 | DOI: 10.1002/masy.201000104

    9. Comparison Between Two Different Synthetic Routes of Pyrrolidinium Functional Polymeric Ionic Liquids (pages 77–82)

      Vasko Jovanovski, German Cabañero, Hans Grande and David Mecerreyes

      Article first published online: 25 JAN 2012 | DOI: 10.1002/masy.201000102

    10. Analytical and Numerical Methods for the Design of Maddock Mixers in Single Screw Plasticizing Technology (pages 83–91)

      Michael Olbrich, Gernot Zitzenbacher, Christoph Hochenauer, Christian Kneidinger and Vincent Lawlor

      Article first published online: 25 JAN 2012 | DOI: 10.1002/masy.201000100

    11. Towards the Antimicrobial Finishing of Poly(isoprene) (pages 98–102)

      Julia Kienberger, Elisabeth Kreutzwiesner, Nadja Noormofidi, Ingo Klarholz, Carsten Harms and Christian Slugovc

      Article first published online: 25 JAN 2012 | DOI: 10.1002/masy.201000098

SEARCH

SEARCH BY CITATION