Macromolecular Symposia

Cover image for Vol. 331-332 Issue 1

Special Issue: New Polymeric Materials & Applications

October 2013

Volume 331-332, Issue 1

Pages 8–196

Issue edited by: Costas Kiparissides, Olga Kammona

  1. Cover Picture

    1. Top of page
    2. Cover Picture
    3. Masthead
    4. Contents
    5. Preface
    6. Articles
    1. You have free access to this content
      Macromol. Symp. 331-332

      Article first published online: 30 OCT 2013 | DOI: 10.1002/masy.201370030

      Thumbnail image of graphical abstract

      Cover: The 9th Hellenic Polymer Society Conference on “New Polymeric Materials & Applications” was held in Thessaloniki, Greece, in 2012. The cover shows the synthetic procedure followed for the fabrication of the hollow capsules and their rupture upon visible-light irradiation. More details can be found in the article by Maria Vamvakaki et al.

  2. Masthead

    1. Top of page
    2. Cover Picture
    3. Masthead
    4. Contents
    5. Preface
    6. Articles
    1. Macromol. Symp. 331-332

      Article first published online: 30 OCT 2013 | DOI: 10.1002/masy.201370031

  3. Contents

    1. Top of page
    2. Cover Picture
    3. Masthead
    4. Contents
    5. Preface
    6. Articles
    1. Macromol. Symp. 331-332

      Article first published online: 30 OCT 2013 | DOI: 10.1002/masy.201370032

  4. Preface

    1. Top of page
    2. Cover Picture
    3. Masthead
    4. Contents
    5. Preface
    6. Articles
    1. Preface (page 8)

      Article first published online: 30 OCT 2013 | DOI: 10.1002/masy.201370033

  5. Articles

    1. Top of page
    2. Cover Picture
    3. Masthead
    4. Contents
    5. Preface
    6. Articles
    1. Thermal Properties of Particle Brush Materials: Effect of Polymer Graft Architecture on the Glass Transition Temperature in Polymer-Grafted Colloidal Systems (pages 9–16)

      Alei Dang, Chin Ming Hui, Rachel Ferebee, Joshua Kubiak, Tiehu Li, Krzysztof Matyjaszewski and Michael R. Bockstaller

      Article first published online: 30 OCT 2013 | DOI: 10.1002/masy.201300062

    2. Metallic Nanocatalysts Embedded within pH-Responsive Polymeric Microgels and Deposition onto Solid Substrates (pages 17–25)

      Maria Kaliva, Melani A. Frysali, Chara Flouraki, Lampros Papoutsakis, Maria Vamvakaki and Spiros H. Anastasiadis

      Article first published online: 30 OCT 2013 | DOI: 10.1002/masy.201300078

    3. On the Synthesis of Molecularly Imprinted Polymers for Analytical and Sensor Applications (pages 26–33)

      Chrysoula Gkementzoglou, Olympia Kotrotsiou, Michael Stoukides and Costas Kiparissides

      Article first published online: 30 OCT 2013 | DOI: 10.1002/masy.201300081

    4. A Molecular Dynamics Study of Polymer/Graphene Nanocomposites (pages 43–49)

      Anastassia N. Rissanou and Vagelis Harmandaris

      Article first published online: 30 OCT 2013 | DOI: 10.1002/masy.201300070

    5. Structure and Dynamics in Hydrophilic Polymer/Layered Silicate Nanocomposites (pages 50–57)

      Kiriaki Chrissopoulou, Sapfo Fotiadou, Bernhard Frick and Spiros H. Anastasiadis

      Article first published online: 30 OCT 2013 | DOI: 10.1002/masy.201300075

    6. Cross-Linked High Temperature Polymer Electrolytes (pages 58–64)

      Christina I. Morfopoulou, Aikaterini K. Andreopoulou and Joannis K. Kallitsis

      Article first published online: 30 OCT 2013 | DOI: 10.1002/masy.201300067

    7. Compatibilization Mechanism and Property Improvement of Immiscible Engineering Plastic Blends (pages 81–88)

      Marianna I. Triantou, Emmanouil M. Chatzigiannakis, Petroula A. Tarantili and Andreas G. Andreopoulos

      Article first published online: 30 OCT 2013 | DOI: 10.1002/masy.201300049

    8. Crosslinking of Epoxidized Natural Rubber by Dicarboxylic Acids: An Alternative to Standard Vulcanization (pages 89–96)

      Myriam Pire, Evdokia K. Oikonomou, Lucie Imbernon, Cédric Lorthioir, Ilias Iliopoulos and Sophie Norvez

      Article first published online: 30 OCT 2013 | DOI: 10.1002/masy.201300053

    9. Functional Polyesters (pages 97–108)

      Inês Raposeiro, Manuela Fonseca, Ana Paula Duarte and João M. Bordado

      Article first published online: 30 OCT 2013 | DOI: 10.1002/masy.201300071

    10. Designing Issues in Polymer Foaming with Supercritical Fluids (pages 109–114)

      Ioannis Tsivintzelis and Costas Panayiotou

      Article first published online: 30 OCT 2013 | DOI: 10.1002/masy.201300064

    11. Antimicrobial Agent-Containing Polymeric Materials (pages 144–151)

      Paraskevi Karakosta, Eleni Koumlili, Olga Kammona and Costas Kiparissides

      Article first published online: 30 OCT 2013 | DOI: 10.1002/masy.201300085

    12. Modification of Poly(allylamine) for Crosslinking by Borax (pages 152–157)

      Evdokia K. Oikonomou, Etienne Audebeau, Sophie Norvez and Ilias Iliopoulos

      Article first published online: 30 OCT 2013 | DOI: 10.1002/masy.201300072

    13. Fabrication of Water Repellent Coatings Using Waterborne Resins for the Protection of the Cultural Heritage (pages 158–165)

      Aikaterini Chatzigrigoriou, Panagiotis N. Manoudis and Ioannis Karapanagiotis

      Article first published online: 30 OCT 2013 | DOI: 10.1002/masy.201300063

    14. Thermogravimetric and Dielectric Study of ER/BaTiO3/ZnO Composites (pages 181–188)

      Athanasios Kanapitsas, Christos Tsonos, Constantinos G. Delides and Georgios C. Psarras

      Article first published online: 30 OCT 2013 | DOI: 10.1002/masy.201300068

    15. Effect of Filler Size on the Thermal Properties of ER/BaTiO3 Composites (pages 189–196)

      Anastasios Patsidis, Stavroula N. Georga, Christoforos A. Krontiras, Georgios C. Psarras, Athanasios Kanapitsas and Christos Tsonos

      Article first published online: 30 OCT 2013 | DOI: 10.1002/masy.201300069

SEARCH

SEARCH BY CITATION