You have free access to this content

Materialwissenschaft und Werkstofftechnik

Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

Cover image for Vol. 43 Issue 1‐2

Special Issue: Contributions of the DFG Collaborative Research Center “Distortion Engineering”

January 2012

Volume 43, Issue 1-2

Pages 1–198

  1. Cover Picture

    1. Top of page
    2. Cover Picture
    3. Foreword
    4. Contents/Inhalt
    5. Articles
    1. You have free access to this content
      Cover Picture – Materialwissenschaft und Werkstofftechnik 1-2/2012 (page 1)

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201290000

  2. Foreword

    1. Top of page
    2. Cover Picture
    3. Foreword
    4. Contents/Inhalt
    5. Articles
    1. You have free access to this content
      Foreword – Materialwissenschaft und Werkstofftechnik 1-2/2012 (page 1)

      Hans-Werner Zoch

      Article first published online: 21 FEB 2012 | DOI: 10.1002/mawe.201290002

  3. Contents/Inhalt

    1. Top of page
    2. Cover Picture
    3. Foreword
    4. Contents/Inhalt
    5. Articles
    1. You have free access to this content
      Contents/Inhalt – Materialwissenschaft und Werkstofftechnik 1-2/2012 (pages 3–5)

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201290001

  4. Articles

    1. Top of page
    2. Cover Picture
    3. Foreword
    4. Contents/Inhalt
    5. Articles
    1. You have free access to this content
      Distortion engineering – interim results after one decade research within the Collaborative Research Center (pages 9–15)

      H.-W. Zoch

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100881

    2. You have free access to this content
      Ring geometry as an important part of distortion potential (pages 16–22)

      F. Frerichs, T. Lübben, F. Hoffmann and H.-W. Zoch

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100882

    3. You have free access to this content
      Relationship between strain distributions and shape deviations of rings caused in clamping (pages 23–28)

      J. Sölter

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100883

    4. You have free access to this content
      Distortion of rings due to inhomogeneous temperature distribution (pages 29–36)

      H. Surm, F. Frerichs, T. Lübben, F. Hoffmann and H.-W. Zoch

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100884

    5. You have free access to this content
      Cross-plane quality control concept of the bearing ring production (pages 37–41)

      P. Zhang, V. Renken and G. Goch

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100885

    6. You have free access to this content
      Compensation of part distortion in soft-turning of bearing rings (pages 42–47)

      B. Beekhuis, D. Stöbener, E. Brinksmeier and G. Goch

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100886

    7. You have free access to this content
      Compensation of roundness deviations of bearing rings by heat treatment (pages 48–55)

      J. Lütjens, H. Surm, M. Hunkel, H. Gafsi, V. Renken and S. Schüttenberg

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100887

    8. You have free access to this content
      Process integrated distortion compensation of large bearing rings (pages 56–62)

      P. Stark, U. Fritsching, M. Hunkel and D. Hansmann

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100888

    9. You have free access to this content
      Experimental investigation concerning the development of distortion potential during the production of 20MnCr5 (pages 63–67)

      C. Prinz and R. Rentsch

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100889

    10. You have free access to this content
      Parameters of distortion in forging gear wheel blanks (pages 68–72)

      H. Rentsch

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100890

    11. You have free access to this content
      Finite element analysis of the hot rolling process on the origins of inhomogeneities related to steel bar distortion (pages 73–77)

      R. Rentsch and C. Prinz

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100891

    12. You have free access to this content
      Anisotropies and inhomogeneities in the microstructure of the case hardening steel SAE 5120 (pages 78–83)

      I. Eisbrecher, B. Clausen, M. Hunkel and R. Rentsch

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100892

    13. You have free access to this content
      Influence of manufacturing parameters on gear distortion (pages 84–90)

      T. Kohlhoff, C. Prinz, R. Rentsch and H. Surm

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100893

    14. You have free access to this content
      Methodical investigation of distortion biasing parameters during case hardening of spur wheels (pages 91–98)

      M. Steinbacher, H. Surm, B. Clausen, Th. Lübben and F. Hoffmann

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100894

    15. You have free access to this content
      Adapted spray quenching for distortion control (pages 99–104)

      S. Schüttenberg, J. Lütjens, M. Hunkel and U. Fritsching

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100895

    16. You have free access to this content
      Strategies for reduced distortion during laser beam welding of shaft-hub joints (pages 105–111)

      F. Buschenhenke, T. Seefeld and F. Vollertsen

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100896

    17. You have free access to this content
      Characterisation of the carrier of distortion potential “residual stresses” in the collaborative research centre “distortion engineering” (pages 112–119)

      J. Epp and T. Hirsch

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100897

    18. You have free access to this content
      Areal parameters for the characterisation of gear distortions (pages 120–124)

      D. Stöbener, A. von Freyberg, M. Fuhrmann and G. Goch

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100898

    19. You have free access to this content
      Semi-optical in-process-metrology to determine the roundness deviation of bearing rings during heat treatment (pages 125–129)

      H. Gafsi and G. Goch

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100899

    20. You have free access to this content
      Monitoring a laser beam heat treatment process by means of digital speckle photography (pages 130–135)

      E. N. Kamau, J. Sakkiettibutra, C. Falldorf, J. Mundt and C. v. Kopylow

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100900

    21. You have free access to this content
      Some recent developments in modelling of heat-treatment phenomena in steel within the collaborative research centre SFB 570 “Distortion Engineering” (pages 136–142)

      M. Wolff, M. Böhm, S. Bökenheide and M. Dalgiç

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100901

    22. You have free access to this content
      Creep, phase transformations and transformation-induced plasticity of 100Cr6 steel during heating (pages 143–149)

      S. Bökenheide, M. Wolff, M. Dalgiç, D. Lammers and T. Linke

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100902

    23. You have free access to this content
      Modelling of phase transformations and transformation plasticity of a continuous casted steel 20MnCr5 incorporating segregations (pages 150–157)

      M. Hunkel

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100903

    24. You have free access to this content
      Numerical distortion simulation of roller bearing rings (pages 158–162)

      O. Grohmann, R. Rentsch, C. Heinzel and E. Brinksmeier

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100904

    25. You have free access to this content
      Process-chain simulation for prediction of the distortion of case-hardened gear blanks (pages 163–170)

      C. Simsir, M. Hunkel, J. Lütjens and R. Rentsch

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100905

    26. You have free access to this content
      Influence of austenitisation and transformation hardening on the residual stress development of laser beam treated components made of 20MnCr5 (pages 171–177)

      J. Sakkiettibutra and E. N. Kamau

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100906

    27. You have free access to this content
      Approaches to describe distortion along process chains (pages 178–185)

      K.-D. Thoben, D. Klein, M. Seifert and T. Wuest

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100907

    28. You have free access to this content
      Method to describe interdependencies of state characteristics related to distortion (pages 186–191)

      T. Wuest, D. Klein, M. Seifert and K.-D. Thoben

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100908

    29. You have free access to this content
      Knowledge and planning system for distortion engineering (pages 192–198)

      K.-D. Thoben, D. Klein, T. Wuest and H.-W. Zoch

      Article first published online: 18 JAN 2012 | DOI: 10.1002/mawe.201100909

SEARCH

SEARCH BY CITATION