Optikdesign

You have free access to this content

Was ist genau?

Fertigungstoleranzen optischer Komponenten und Systeme

  1. Christoph Gerhard1,*,
  2. Stephanie Wienecke2,*,
  3. Sandra Lotz3,*

Article first published online: 23 FEB 2011

DOI: 10.1002/opph.201190154

Issue

Optik & Photonik

Optik & Photonik

Volume 6, Issue 1, pages 35–38, February 2011

Additional Information

How to Cite

Gerhard, C., Wienecke, S. and Lotz, S. (2011), Was ist genau?. Optik & Photonik, 6: 35–38. doi: 10.1002/opph.201190154

Author Information

  1. 1

    Hochschule für angewandte Wissenschaft und Kunst (HAWK) Göttingen, Von-Ossietzky-Straße 99, 37085 Göttingen, Tel.: +49 (0)551 3705-281, Fax: +49 (0)551 3705-206

  2. 2

    Qioptiq Photonics GmbH & Co. KG, Königsallee 23, 37081 Göttingen, Tel.: +49 (0)551 6935-379, Fax: +49 (0)551 6935-166

  3. 3

    Qioptiq Photonics GmbH & Co. KG, Königsallee 23, 37081 Göttingen, Tel.: +49 (0)551 6935-151, Fax: +49 (0)551 6935-166

*Hochschule für angewandte Wissenschaft und Kunst (HAWK) Göttingen, Von-Ossietzky-Straße 99, 37085 Göttingen, Tel.: +49 (0)551 3705-281, Fax: +49 (0)551 3705-206, http://www.hawk-hhg.de

Publication History

  1. Issue published online: 23 FEB 2011
  2. Article first published online: 23 FEB 2011

SEARCH

SEARCH BY CITATION

ARTICLE TOOLS

Get PDF (304K)

REFERENCES

  • 1
    Paul R. Yoder: „Mounting Optics in Optical Instruments”, 2. Aufl. 2008, SPIE Publications, Bellingham, Washington
  • 2
    D. S. Grey: „Tolerance Sensitivity and Optimization”, Applied Optics, 9/3, (1970), S. 523—526.
  • 3
    G. Adams: „Selection of Tolerances”, Proc. of SPIE 892 (1988), S. 173-85
  • 4
    T. Thöniß, G. Adams, C. Gerhard: „Optical System Design - Software Tools Cover Envelope Calculations to the Final Engineering Drawings”, Optik & Photonik, 2, 2009, S. 30—33.
    Direct Link:
  • 5
    D. M. Aikens: „The Truth About Scratch And Dig”, Optical Fabrication and Testing, OSA Technical Digest (CD) (Optical Society of America, 2010, paper OTuA2.
  • 6
    D. Y. Wang, R. E. English, D. M. Aikens: „Implementation of ISO 10110 optics drawing standards for the National Ignition Facility”, Proc. of SPIE 3782, Optical Manufacturing and Testing III (1999), S. 502-508
  • 7
    D. M. Aikens: „Meaningful Surface Roughness and Quality Tolerances”, International Optical Design Conference, OSA Technical Digest (CD) (Optical Society of America, 2010), paper ITuD3.
Get PDF (304K)