Polymers for Advanced Technologies

Cover image for Vol. 26 Issue 1

January 2015

Volume 26, Issue 1

Pages 1–120

  1. Research articles

    1. Top of page
    2. Research articles
    3. Short communication
    1. Novel species of soluble thermally stable poly(keto ether ether amide)s: preparation, characterization, and properties (pages 1–9)

      Elahe Sabbaghian, Shahram Mehdipour-Ataei, Seyedmehrdad Jalilian, Mahshid Esfahanizadeh, Ali Mohammad Salehi, Fardin Khodabakhshi and Elham Jalalian

      Article first published online: 22 SEP 2014 | DOI: 10.1002/pat.3401

    2. Novel bio-based IPNs obtained by simultaneous thermal polymerization of flexible methacrylate network based on a vegetable oil and a rigid epoxy (pages 19–25)

      Brindusa Balanuca, Adriana Lungu, Iulia Conicov, Raluca Stan, Eugeniu Vasile, Dumitru Mircea Vuluga and Horia Iovu

      Article first published online: 27 OCT 2014 | DOI: 10.1002/pat.3413

    3. Enhanced thermal conductivity of epoxy–matrix composites with hybrid fillers (pages 26–31)

      Karolina Gaska, Andrzej Rybak, Czeslaw Kapusta, Robert Sekula and Artur Siwek

      Article first published online: 18 NOV 2014 | DOI: 10.1002/pat.3414

    4. Synthesis and characterization of a nano-hydroxyapatite/chitosan/polyethylene glycol nanocomposite for bone tissue engineering (pages 41–48)

      Mohammad Shakir, Reshma Jolly, Mohd Shoeb Khan, Noor-e Iram, Tarun Kumar Sharma and Saud Ibrahim Al-Resayes

      Article first published online: 18 NOV 2014 | DOI: 10.1002/pat.3417

    5. Boronated (co)polystyrene: monomer reactivity ratios, thermal behavior and flammability (pages 49–56)

      Malgorzata Wiacek, Dorota Wesolek, Szymon Rojewski, Krzysztof Bujnowicz and Ewa Schab-Balcerzak

      Article first published online: 18 NOV 2014 | DOI: 10.1002/pat.3418

    6. Influence of the soft segment length on the properties of water-cured poly(carbonate-urethane-urea)s (pages 57–67)

      Magdalena M. Mazurek, Karolina Tomczyk, Monika Auguścik, Joanna Ryszkowska and Gabriel Rokicki

      Article first published online: 18 NOV 2014 | DOI: 10.1002/pat.3419

    7. Comparison of copolymer emulsions of fluorine and siloxane-containing acrylates with core–shell structure for water-repellent cotton fabrics coatings (pages 68–76)

      J. Lin, C. Zheng, M. N. Zhu, Y. Z. Chen, P. P. Lu, Q. Liu, X. F. Cai, J. W. Zhuang, X. M. Cai, L. P. Liao, G. Y. Yuan and C. L. Xu

      Article first published online: 18 NOV 2014 | DOI: 10.1002/pat.3420

    8. Formation of a large-scale shish-kebab structure of polyoxymethylene in the melt spinning and the crystalline morphology evolution after hot stretching (pages 77–84)

      Lin Li, Tao Zhou, Jianzhong Liu, Qianping Ran, Guangdou Ye, Jihai Zhang, Pengqing Liu, Aiming Zhang, Zhiqian Yang, Degen Xu and Jiaping Liu

      Article first published online: 27 NOV 2014 | DOI: 10.1002/pat.3422

    9. Antimicrobial activity of hydrophobic cotton coated with N-halamine (pages 99–103)

      Xiaoli Cheng, Rong Li, Jinmei Du, Junfeng Sheng, Kaikai Ma, Xuehong Ren and Tung-Shi Huang

      Article first published online: 24 NOV 2014 | DOI: 10.1002/pat.3426

    10. Nanoclay modified silica phenolic composites: mechanical properties and thermal response under simulated atmospheric re-entry conditions (pages 104–109)

      Temina Mary Robert, M. Satheesh Chandran, S. Jishnu, K. Sunitha, R. S. Rajeev, Dona Mathew, N. Sreenivas, L. Aravindakshan Pillai and C. P. Reghunadhan Nair

      Article first published online: 24 NOV 2014 | DOI: 10.1002/pat.3429

    11. Antibacterial and antifungal LDPE films for active packaging (pages 110–116)

      Rotem Shemesh, Maksym Krepker, Diana Goldman, Yael Danin-Poleg, Yechezkel Kashi, Nadav Nitzan, Anita Vaxman and Ester Segal

      Article first published online: 1 DEC 2014 | DOI: 10.1002/pat.3434

  2. Short communication

    1. Top of page
    2. Research articles
    3. Short communication

SEARCH

SEARCH BY CITATION