Silicon carbide-strengthened magnetorheological elastomer: Preparation and mechanical property

Authors

  • Jie Yang,

    1. Department of Modern Mechanics, CAS Key Laboratory of Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei 230027, People's Republic of China
    Search for more papers by this author
  • Xinglong Gong,

    Corresponding author
    1. Department of Modern Mechanics, CAS Key Laboratory of Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei 230027, People's Republic of China
    Search for more papers by this author
  • Luhang Zong,

    1. Department of Modern Mechanics, CAS Key Laboratory of Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei 230027, People's Republic of China
    Search for more papers by this author
  • Chao Peng,

    1. Department of Modern Mechanics, CAS Key Laboratory of Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei 230027, People's Republic of China
    Search for more papers by this author
  • Shouhu Xuan

    1. Department of Modern Mechanics, CAS Key Laboratory of Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei 230027, People's Republic of China
    Search for more papers by this author

Abstract

A novel silicon carbide (SiC)-strengthened magnetorheological elastomers (MREs) was developed to enhance its viscoelastic performance. The influences of the size and weight content of the SiC particles on the viscoelastic performance of the MREs were systematically studied. The shear storage modulus, damping property, and magnetorheological effects were analyzed to evaluate their dynamic properties. Under optimum condition, the initial storage modulus (G0) of the MRE-0.06-SiC-3 (SiC weight content 3.2 wt%, mean diameter 0.06 μm) is about 2.16 times larger than the MRE-0.06-SiC-0 (nondoped MRE), whereas the magnetorheological effect was almost kept constant. In addition, the damping properties of the as-prepared MREs which were obtained from the intrinsic damping, the magnetomechanical hysteresis, and the interface damping were also analyzed. These results provided a meaningful method for developing MREs with controllable storage modulus and damping capacity. POLYM. ENG. SCI., 53:2615–2623, 2013. © 2013 Society of Plastics Engineers

Ancillary