SEARCH

SEARCH BY CITATION

Cited in:

CrossRef

This article has been cited by:

  1. 1
    A. Taguet, P. Cassagnau, J.-M. Lopez-Cuesta, Structuration, selective dispersion and compatibilizing effect of (nano)fillers in polymer blends, Progress in Polymer Science, 2014, 39, 8, 1526

    CrossRef

  2. 2
    Xi-Qiang Liu, Rui-Ying Bao, Zheng-Ying Liu, Wei Yang, Bang-Hu Xie, Ming-Bo Yang, Effect of nano-silica on the phase inversion behavior of immiscible PA6/ABS blends, Polymer Testing, 2013, 32, 1, 141

    CrossRef

  3. 3
    Mei Fong Chong, Junghui Chen, Pin Pin Oh, Zong-Sheng Chen, Modeling analysis of membrane reactor for biodiesel production, AIChE Journal, 2013, 59, 1
  4. 4
    Seyedali Monemian, Seyed Hassan Jafari, Hossein Ali Khonakdar, Vahabodin Goodarzi, Uta Reuter, Petra Pötschke, MWNT-filled PC/ABS blends: Correlation of morphology with rheological and electrical response, Journal of Applied Polymer Science, 2013, 130, 2
  5. 5
    Zong-yan Gui, Hai-rui Wang, Yun Gao, Chong Lu, Shu-jun Cheng, Morphology and melt rheology of biodegradable poly(lactic acid)/poly(butylene succinate adipate) blends: effect of blend compositions, Iranian Polymer Journal, 2012, 21, 2, 81

    CrossRef

  6. 6
    C.F. Antunes, M. van Duin, A.V. Machado, Morphology and phase inversion of EPDM/PP blends – Effect of viscosity and elasticity, Polymer Testing, 2011, 30, 8, 907

    CrossRef

  7. 7
    Shant Shahbikian, Pierre J. Carreau, Marie-Claude Heuzey, Maria D. Ellul, Hari P. Nadella, John Cheng, Pradeep Shirodkar, Rheology/morphology relationship of plasticized and nonplasticized thermoplastic elastomers based on ethylene–propylene–diene–terpolymer and polypropylene, Polymer Engineering & Science, 2011, 51, 11
  8. 8
    Witold Brostow, Tea Datashvili, James Geodakyan, Jesse Lou, Thermal and mechanical properties of EPDM/PP + thermal shock-resistant ceramic composites, Journal of Materials Science, 2011, 46, 8, 2445

    CrossRef

  9. 9
    Bo Yin, Jie Lan, Lan-Peng Li, Ming-Bo Yang, Morphology Evolution in PC/PE Blends with and without Compatibilization During Twin-Screw Extrusion, Polymer-Plastics Technology and Engineering, 2010, 49, 5, 503

    CrossRef

  10. 10
    G. Filippone, N.Tz. Dintcheva, F.P. La Mantia, D. Acierno, Using organoclay to promote morphology refinement and co-continuity in high-density polyethylene/polyamide 6 blends – Effect of filler content and polymer matrix composition, Polymer, 2010, 51, 17, 3956

    CrossRef

  11. 11
    V. Yquel, A. V. Machado, J. A. Covas, J. J. Flat, Contribution of the melting stage to the evolution of the morphology and chemical conversion of immiscible polyamide/polyethylene blends in twin-screw extruders, Journal of Applied Polymer Science, 2009, 114, 3
  12. 12
    Bo Li, Yong Zhang, Shuai Wang, Jiliang Ji, Effect of POSS on morphology and properties of poly(2,6-dimethyl-1,4-phenylene oxide)/polyamide 6 blends, European Polymer Journal, 2009, 45, 8, 2202

    CrossRef

  13. 13
    V. Sridhar, Zhang Zhen Xiu, Deng Xu, Sung Hyo Lee, Jin Kuk Kim, Dong Jin Kang, Dae-Suk Bang, Fly ash reinforced thermoplastic vulcanizates obtained from waste tire powder, Waste Management, 2009, 29, 3, 1058

    CrossRef

  14. You have free access to this content14
    Mohammed H. Al-Saleh, Uttandaraman Sundararaj, Mechanical properties of carbon black-filled polypropylene/polystyrene blends containing styrene-butadiene-styrene copolymer, Polymer Engineering & Science, 2009, 49, 4
  15. 15
    A. Suresh, M. S. Sureshkumar, K. Kargupta, S. Ganguly, K. Naskar, G. B. Nando, Predicting physico-mechanical properties of LLDPE and PDMS rubber blends using ANFIS-based model, Plastics, Rubber and Composites, 2009, 38, 5, 173

    CrossRef

  16. 16
    G. Filippone, N.Tz. Dintcheva, D. Acierno, F.P. La Mantia, The role of organoclay in promoting co-continuous morphology in high-density poly(ethylene)/poly(amide) 6 blends, Polymer, 2008, 49, 5, 1312

    CrossRef

  17. 17
    T.S. Omonov, C. Harrats, G. Groeninckx, P. Moldenaers, Anisotropy and instability of the co-continuous phase morphology in uncompatibilized and reactively compatibilized polypropylene/polystyrene blends, Polymer, 2007, 48, 18, 5289

    CrossRef

  18. 18
    Shuichi MAEDA, Eiichi KAMEI, Toshikazu TAKIGAWA, Toshiro MASUDA, Co-continuous Morphology in Incompatible Binary Polymer Blends Prepared by Melt-blending, KOBUNSHI RONBUNSHU, 2007, 64, 11, 791

    CrossRef

  19. 19
    Sung Hyo Lee, Maridass Balasubramanian, Jin Kuk Kim, Dynamic reaction inside co-rotating twin screw extruder. II. Waste ground rubber tire powder/polypropylene blends, Journal of Applied Polymer Science, 2007, 106, 5
  20. 20
    Suprakas Sinha Ray, Jayita Bandyopadhyay, Mosto Bousmina, Effect of Organoclay on the Morphology and Properties of Poly(propylene)/Poly[(butylene succinate)-co-adipate] Blends, Macromolecular Materials and Engineering, 2007, 292, 6
  21. You have free access to this content21
    Bo Yin, Yin Zhao, Run-Ze Yu, Hai-Ning An, Ming-Bo Yang, Morphology development of PC/PE blends during compounding in a twin-screw extruder, Polymer Engineering & Science, 2007, 47, 1
  22. 22
    T.S. Omonov, C. Harrats, P. Moldenaers, G. Groeninckx, Phase continuity detection and phase inversion phenomena in immiscible polypropylene/polystyrene blends with different viscosity ratios, Polymer, 2007, 48, 20, 5917

    CrossRef

  23. 23
    Yao-Xue Du, Jin-Ping Qu, Phase morphology control of immiscible polymer blends under vibration force field, Journal of Applied Polymer Science, 2006, 102, 3
  24. 24
    Mohamed Jaziri, Tasnim Kossentini Kallel, Souad Mbarek, Boubaker Elleuch, Morphology development in polyethylene/polystyrene blends: the influence of processing conditions and interfacial modification, Polymer International, 2005, 54, 10
  25. 25
    P Martin, C Maquet, R Legras, C Bailly, L Leemans, M van Gurp, M van Duin, Conjugated effects of the compatibilization and the dynamic vulcanization on the phase inversion behavior in poly(butylene terephthalate)/epoxide-containing rubber reactive polymer blends, Polymer, 2004, 45, 15, 5111

    CrossRef

  26. 26
    Zachariah Oommen, Sisy R. Zachariah, Sabu Thomas, Gabriel Groeninckx, Paula Moldenaers, Jan Mewis, Melt rheology and morphology of uncompatibilized and in situ compatibilized nylon-6/ethylene propylene rubber blends, Journal of Applied Polymer Science, 2004, 92, 1
  27. 27
    Yongjin Li, Hiroshi Shimizu, Novel morphologies of poly(phenylene oxide) (PPO)/polyamide 6 (PA6) blend nanocomposites, Polymer, 2004, 45, 22, 7381

    CrossRef

  28. 28
    C. Harrats, T. Omonov, G. Groeninckx, P. Moldenaers, Phase morphology development and stabilization in polycyclohexylmethacrylate/polypropylene blends: uncompatibilized and reactively compatibilized blends using two reactive precursors, Polymer, 2004, 45, 24, 8115

    CrossRef

  29. 29
    Petra Pötschke, D. R. Paul, Formation of Co-continuous Structures in Melt-Mixed Immiscible Polymer Blends, Journal of Macromolecular Science, Part C: Polymer Reviews, 2003, 43, 1, 87

    CrossRef

  30. 30
    Bhanu Nandan, L. D. Kandpal, G. N. Mathur, Poly(ether ether ketone)/poly(aryl ether sulfone) blends: Relationships between morphology and mechanical properties, Journal of Applied Polymer Science, 2003, 90, 11
  31. 31
    S.H Jafari, P Pötschke, M Stephan, H Warth, H Alberts, Multicomponent blends based on polyamide 6 and styrenic polymers: morphology and melt rheology, Polymer, 2002, 43, 25, 6985

    CrossRef

  32. 32
    G. Akay, L. Tong, Preparation of Colloidal Low-Density Polyethylene Latexes by Flow-Induced Phase Inversion Emulsification of Polymer Melt in Water, Journal of Colloid and Interface Science, 2001, 239, 2, 342

    CrossRef

  33. 33
    Harm Veenstra, Jaap Van Dam, Abe Posthuma de Boer, On the coarsening of co-continuous morphologies in polymer blends: effect of interfacial tension, viscosity and physical cross-links, Polymer, 2000, 41, 8, 3037

    CrossRef

  34. 34
    N. Kitayama, H. Keskkula, D.R. Paul, Reactive compatibilization of nylon 6/styrene–acrylonitrile copolymer blends. Part 1. Phase inversion behavior, Polymer, 2000, 41, 22, 8041

    CrossRef

  35. 35
    R.C Willemse, A Posthuma de Boer, J van Dam, A.D Gotsis, Co-continuous morphologies in polymer blends: the influence of the interfacial tension, Polymer, 1999, 40, 4, 827

    CrossRef

  36. 36
    Noureddin Moussaif, Robert Jérôme, Compatibilization of immiscible polymer blends (PC/PVDF) by the addition of a third polymer (PMMA): analysis of phase morphology and mechanical properties, Polymer, 1999, 40, 14, 3919

    CrossRef

  37. 37
    JeKyun Lee, ChangDae Han, Evolution of a dispersed morphology from a co-continuous morphology in immiscible polymer blends, Polymer, 1999, 40, 10, 2521

    CrossRef

  38. 38
    J.K. Lee, C.D. Han, Evolution of polymer blend morphology during compounding in an internal mixer, Polymer, 1999, 40, 23, 6277

    CrossRef

  39. 39
    Harm Veenstra, Jaap Van Dam, Abe Posthuma de Boer, Formation and stability of co-continuous blends with a poly(ether-ester) block copolymer around its order–disorder temperature, Polymer, 1999, 40, 5, 1119

    CrossRef

  40. 40
    R.C. Willemse, A. Posthuma de Boer, J. van Dam, A.D. Gotsis, Co-continuous morphologies in polymer blends: a new model, Polymer, 1998, 39, 24, 5879

    CrossRef

  41. 41
    G. Akay, Flow-induced phase inversion in the intensive processing of concentrated emulsions, Chemical Engineering Science, 1998, 53, 2, 203

    CrossRef

  42. 42
    O.S. Rodríguez-Fernández, S. Sanchez-Valdes, I.G. Yánez-Flores, L.F. Ramos de Valle, M L. Lopez-Quintanilla, MELT RHEOLOGY, MORPHOLOGY, AND MECHANICAL PROPERTIES OF THERMOPLASTIC/RUBBER BLENDS, Journal of Polymer Engineering, 1998, 18, 5

    CrossRef

  43. 43
    Fu-Sen Liao, An-Chung Su, Unexpected gel from anhydride-modified polypropylene/butyl rubber blends, Journal of Polymer Research, 1995, 2, 3, 155

    CrossRef

  44. 44
    Fu-Sen Liao, An-Chung Su, Tzu-Chien J. Hsu, Damping behaviour of dynamically cured butyl rubber/polypropylene blends, Polymer, 1994, 35, 12, 2579

    CrossRef

  45. 45
    Robin N. Santra, Sanjoy Roy, Golok B. Nando, Studies on Reaction Mechanism Between Ethylene-Methyl Acrylate Copolymer and Poly Dimethyl Siloxane Rubber Processed Under High Shear and Temperature, Polymer-Plastics Technology and Engineering, 1994, 33, 1, 23

    CrossRef

  46. 46
    Premamoy Ghosh, Bibha Chattopadhyay, Achintya Kumar Sen, Thermoplastic elastomers from blends of polyethylene and ethylene-propylene-diene rubber: influence of vulcanization technique on phase morphology and vulcanizate properties, Polymer, 1994, 35, 18, 3958

    CrossRef

  47. 47
    T.H. Chen, A.C. Su, Morphology of poly(p-phenylene sulfide)polyethylene blends, Polymer, 1993, 34, 23, 4826

    CrossRef

  48. 48
    Robin N. Santra, Sanjoy Roy, Anil K. Bhowmick, G. B. Nando, Studies on miscibility of blends of ethylene methyl acrylate and polydimethyl siloxane rubber, Polymer Engineering & Science, 1993, 33, 20
  49. 49
    Ivan Fortelny, Josef Kovář, Effect of the composition and properties of components on the phase structure of polymer blends, European Polymer Journal, 1992, 28, 1, 85

    CrossRef

  50. 50
    C.H. Wu, A.C. Su, Suppression of side reactions during melt functionalization of ethylene-propylene rubber, Polymer, 1992, 33, 9, 1987

    CrossRef

  51. 51
    C. H. Wu, A. C. Su, Functionalization of ethylene-propylene rubber via melt mixing, Polymer Engineering & Science, 1991, 31, 23
  52. 52
    Soney C. George, Sabu Thomas, Manufacturing of Multiphase Polymeric Systems,