Polymer Engineering & Science

Cover image for Polymer Engineering & Science

July 1970

Volume 10, Issue 4

Pages fmi–fmi, 193–250

  1. Masthead

    1. Top of page
    2. Masthead
    3. Articles
    1. Masthead (page fmi)

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760100401

  2. Articles

    1. Top of page
    2. Masthead
    3. Articles
    1. Capillary flow instability of ethylene polymer melts (pages 193–203)

      L. L. Blyler Jr. and A. C. Hart Jr.

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760100402

    2. Extrusion blow molding of polyvinyl chloride homo- and copolymers (pages 204–208)

      W. Taylor and L. F. King

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760100403

    3. Numerical simulation of injection mold filling (pages 209–214)

      D. H. Harry and R. G. Parrott

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760100404

    4. Torque rheometer evaluation of polypropylene process stability (pages 215–221)

      J. E. Goodrich

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760100405

    5. Polymer solubility parameters determined from measurements in a single solvent (pages 222–224)

      W. R. Song and D. W. Brownawell

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760100406

    6. Thermal stability of networks containing siloxane linkages (pages 225–227)

      M. T. Shaw and A. V. Tobolsky

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760100407

    7. Mechanism of ultraviolet degradation and stabilization in plastics (pages 228–234)

      R. D. Deanin, S. A. Orroth, R. W. Eliasen and T. N. Greer

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760100408

    8. Evaluation of biocides for treatment of polyvinyl chloride film (pages 241–246)

      A. M. Kaplan, M. Greenberger and T. M. Wendt

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760100410

    9. Quantitative thermal analysis of polyblends (pages 247–250)

      H. E. Bair

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760100411

SEARCH

SEARCH BY CITATION