Polymer Engineering & Science

Cover image for Polymer Engineering & Science

September 1978

Volume 18, Issue 12

Pages fmi–fmi, 921–984

  1. Masthead

    1. Top of page
    2. Masthead
    3. Editorial
    4. Articles
    1. Masthead (page fmi)

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760181201

  2. Editorial

    1. Top of page
    2. Masthead
    3. Editorial
    4. Articles
    1. You have free access to this content
      Thomas G. Fox (1921-1977) (pages 921–922)

      Roger S. Porter

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760181202

  3. Articles

    1. Top of page
    2. Masthead
    3. Editorial
    4. Articles
    1. Crazing of fibrous polymers (pages 923–927)

      A. Carton, D. J. Carlsson, R. F. Stepaniak and D. M. Wiles

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760181203

    2. The effect of additives on the crystallization of poly (butylene terephthalate) (pages 932–936)

      Eng Pi Chang, Rudolf O. Kirsten and Eugene L. Slagowski

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760181205

    3. Polymerization of α, α-disubstituted-β-propiolactones and lactams. 9. ABA block copolymers of α-methyl-α-butyl-β-propiolactone and pivalolactone (pages 937–942)

      Robert W. Lenz, Michael Dror, Robert Jorgensen and Robert H. Marchessault

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760181206

    4. The influence of morphology on the tensile properties of polyethylenes (pages 943–950)

      P. J. Phillips and J. Patel

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760181207

    5. Theoretical analysis on the flow of melts in a curved circular tube (pages 951–954)

      Osamu Akita and Katsuhiko Ito

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760181208

    6. Heat transfer to a plastic tape traveling over heated rolls (pages 955–962)

      I. Brazinsky and H. L. Davis

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760181209

    7. Elongational flow of polymer melts (pages 963–968)

      Eric D. Johnson and Stanley Middleman

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760181210

    8. Computation of the creep behavior of thermoplastics (pages 969–972)

      F. Overath and G. Menges

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760181211

    9. Geometry of fully wiped twin-screw equipment (pages 973–984)

      M. L. Booy

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760181212

SEARCH

SEARCH BY CITATION