Polymer Engineering & Science

Cover image for Polymer Engineering & Science

June 1982

Volume 22, Issue 9

Pages fmi–fmi, 521–586

  1. Masthead

    1. Top of page
    2. Masthead
    3. Articles
    1. Masthead (page fmi)

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760220901

  2. Articles

    1. Top of page
    2. Masthead
    3. Articles
    1. Capillary and slit flow behavior of concentrated solutions of a rod-like polymer (pages 521–527)

      C. H. Kao and D. G. Baird

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760220902

    2. Energy conservation in plastics processing: A review (pages 528–535)

      J. M. Dealy

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760220903

    3. The compressive deformation of polymeric foams (pages 545–548)

      James T. Tsai

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760220905

    4. Fracture surface features of polyethylene pipe samples (pages 549–555)

      C. S. Lee and M. M. Epstein

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760220906

    5. Unsaturated polyesters from 2,2-dimethyl-1,3-propanediol (pages 556–559)

      S. N. Tong and H. K. Horng

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760220907

    6. Residual stresses in polymers III: The influence of injection-molding process conditions (pages 560–568)

      A. Siegmann, A. Buchman and S. Kenig

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760220908

    7. The dynamics of parison free inflation in extrusion blow molding (pages 569–577)

      M. E. Ryan and A. Dutta

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760220909

    8. A plasticating model for single-screw extruders (pages 578–586)

      Hisahiko Fukase, Takeshi Kunio, Sadahiko Shinya and Akihiro Nomura

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760220910

SEARCH

SEARCH BY CITATION