Polymer Engineering & Science

Cover image for Polymer Engineering & Science

February 1988

Volume 28, Issue 3

Pages fmi–fmi, 121–187

  1. Masthead

    1. Top of page
    2. Masthead
    3. Articles
    1. Masthead (page fmi)

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760280301

  2. Articles

    1. Top of page
    2. Masthead
    3. Articles
    1. Estimation and control in polymerization reactors. A review (pages 121–135)

      G. E. Eliçabe and G. R. Meira

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760280302

    2. Rheological properties of thermotropic liquid crystalline aromatic copolyesters (pages 136–142)

      Zhenglong Zhou, Xiuge Wu and Meirong Wang

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760280303

    3. Optimal anticipatory control of ram velocity in injection molding (pages 147–156)

      I. O. Pandelidis and A. R. Agrawal

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760280305

    4. Observers for optimal anticipatory control of ram velocity in injection molding (pages 157–164)

      A. R. Agrawal and I. O. Pandelidis

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760280306

    5. The effect of processing conditions on the microstructure of embossed polyethylene films (pages 165–169)

      M. R. Kamal, A. Haber and Song Li

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760280307

    6. Production of controlled-rheology polypropylene resins by peroxide promoted degradation during extrusion (pages 170–180)

      C. Tzoganakis, J. Vlachopoulos and A. E. Hamielec

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760280308

    7. Effects of mechanical drawing on the structure and properties of peek (pages 181–187)

      Lidia H. Lee, Janice J. Vanselow and Nathaniel S. Schneider

      Article first published online: 25 AUG 2004 | DOI: 10.1002/pen.760280309

SEARCH

SEARCH BY CITATION