Polymer Engineering & Science

Cover image for Polymer Engineering & Science

August 1994

Volume 34, Issue 15

Pages fmi–fmi, 1161–1230

  1. Masthead

    1. Top of page
    2. Masthead
    3. Articles
    1. Masthead (page fmi)

      Article first published online: 26 AUG 2004 | DOI: 10.1002/pen.760341501

  2. Articles

    1. Top of page
    2. Masthead
    3. Articles
    1. Multiobjective dynamic optimization of a nonvaporizing nylon 6 batch reactor (pages 1161–1172)

      Rajesh M. Wajge and Santosh K. Gupta

      Article first published online: 26 AUG 2004 | DOI: 10.1002/pen.760341502

    2. Entrance pressure drop studies of corn meal dough during extrusion cooking (pages 1187–1195)

      M. Bhattacharya, K. Seethamraju and M. Padmanabhan

      Article first published online: 26 AUG 2004 | DOI: 10.1002/pen.760341504

    3. Experimental study of transcription of minute width grooves in injection molding (pages 1211–1218)

      Masaki Yoshii, Hiroki Kuramoto and Kazunori Kato

      Article first published online: 26 AUG 2004 | DOI: 10.1002/pen.760341507

    4. Processing effects on poly(ethylene terephthalate) from bottle scraps (pages 1219–1223)

      Giorgio Giannotta, Riccardo Po', Nicoletta Cardi, Elena Tampellini, Ernesto Occhiello, Fabio Garbassi and Luigi Nicolais

      Article first published online: 26 AUG 2004 | DOI: 10.1002/pen.760341508

    5. Flow field analysis of a cavity transfer mixer (pages 1224–1230)

      Chicheng Wang and Ica Manas-Zloczower

      Article first published online: 26 AUG 2004 | DOI: 10.1002/pen.760341509

SEARCH

SEARCH BY CITATION