Polymer Engineering & Science

Cover image for Polymer Engineering & Science

January 1997

Volume 37, Issue 1

Pages 1–241

  1. Articles

    1. Top of page
    2. Articles
    1. Critical assessment of methods for evaluating JIC for a medical grade ultra high molecular weight polyethylene (pages 11–17)

      R. S. Pascaud, W. T. Evans, P. J. J. McCullagh and D. Fitzpatrick

      Version of Record online: 8 APR 2004 | DOI: 10.1002/pen.11640

    2. Measurement of internal stresses in coatings using time resolved fluorescence (pages 24–30)

      Tohru Shiga, Takeshi Narita, Kazuyuki Tachi, Akane Okada, Hideroh Takahashi and Toshio Kurauchi

      Version of Record online: 8 APR 2004 | DOI: 10.1002/pen.11642

    3. Hybrid effects on mechanical properties of polyoxymethylene (pages 45–58)

      S. Hashemi, P. Elmes and S. Sandford

      Version of Record online: 8 APR 2004 | DOI: 10.1002/pen.11644

    4. Tensile properties and stress relaxation of polypropylene at elevated temperatures (pages 81–90)

      Takashi Ariyama, Yasunari Mori and Kenji Kaneko

      Version of Record online: 8 APR 2004 | DOI: 10.1002/pen.11647

    5. Ambient temperature compaction of polycarbonate powder (pages 120–127)

      Linda W. Vick and Ronald G. Kander

      Version of Record online: 8 APR 2004 | DOI: 10.1002/pen.11652

    6. Ultimate properties of polycarbonate blends: Effects of inclusion plastic deformation and of matrix phase continuity (pages 128–137)

      Jan Kolar̆ík, Frantis̆ek Lednický, Giancarlo Locati and Luca Fambri

      Version of Record online: 8 APR 2004 | DOI: 10.1002/pen.11653

    7. Chemorheology of poly(urethane/isocyanurate) formation (pages 143–152)

      Xiudong Sun, James Toth and L. James Lee

      Version of Record online: 8 APR 2004 | DOI: 10.1002/pen.11655

    8. The structure and morphology of syndiotactic polystyrene injection molded coupons (pages 153–165)

      A. M. Evans, E. J. C. Kellar, J. Knowles, C. Galiotis, C. J. Carriere and E. H. Andrews

      Version of Record online: 8 APR 2004 | DOI: 10.1002/pen.11656

    9. Morphology and mechanical properties of injection molded articles with weld-lines (pages 228–241)

      Jin Kon Kim, Ju Ho Song, S. T. Chung and T. H. Kwon

      Version of Record online: 8 APR 2004 | DOI: 10.1002/pen.11665

SEARCH

SEARCH BY CITATION