Polymer Engineering & Science

Cover image for Polymer Engineering & Science

September 1997

Volume 37, Issue 9

Pages 1429–1595

  1. Preface

    1. Top of page
    2. Preface
    3. Articles
    1. Commentary by Gregory B. McKenna and John D. Barnes (page 1429)

      Gregory B. McKenna and John D. Barnes

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11789

  2. Articles

    1. Top of page
    2. Preface
    3. Articles
    1. Fluorescence monitoring of polymer injection molding: Model development (pages 1430–1441)

      Anthony J. Bur and Charles L. Thomas

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11790

    2. Physical aging kinetics of syndiotactic polystyrene as determined from creep behavior (pages 1459–1468)

      Jorg Beckmann, Gregory B. McKenna, Brian G. Landes, David H. Bank and Robert A. Bubeck

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11793

    3. Stress relaxation experiments in polycarbonate: A comparison of volume changes for two commercial grades (pages 1469–1474)

      D. M. Colucci, P. A. O'Connell and G. B. McKenna

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11794

    4. Morphology of syndiotactic polystyrene as examined by small-angle X-ray scattering (pages 1480–1484)

      John D. Barnes, Gregory B. McKenna, Brian G. Landes, Robert A. Bubeck and David Bank

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11796

    5. Synthesis and characterization of flame resistant poly(arylene ether)s (pages 1501–1511)

      D. J. Riley, A. Gungor, S. A. Srinivasan, M. Sankarapandian, C. Tchatchoua, M. W. Muggli, T. C. Ward, J. E. McGrath and T. Kashiwagi

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11799

    6. Stability of blends of thermotropic liquid crystalline polymers with thermoplastic polymers (pages 1512–1525)

      A. G. C. Machiels, J. Van Dam, A. Posthuma De Boer and B. Norder

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11800

    7. Comparative measurements of interfacial tension in a model polymer blend (pages 1540–1549)

      I. Sigillo, L. di Santo, S. Guido and N. Grizzuti

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11802

    8. Control of plastic melt temperature: A multiple input multiple output model predictive approach (pages 1550–1563)

      Rickey Dubay, Adam C. Bell and Yash P. Gupta

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11803

    9. Creep and physical aging of injection molded, fiber reinforced polypropylene (pages 1572–1581)

      B. E. Read and P. E. Tomlins

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11805

    10. Conjugate transport in polymer melt flow through extrusion dies (pages 1582–1595)

      P. Lin and Y. Jaluria

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11806

SEARCH

SEARCH BY CITATION