Polymer Engineering & Science

Cover image for Polymer Engineering & Science

May 1998

Volume 38, Issue 5

Pages 707–877

  1. Articles

    1. Top of page
    2. Articles
    3. Review
    4. Articles
    1. Compatibility in binary blends of thermotropic liquid crystal polymers (pages 716–726)

      M. J. Stachowski and A. T. Dibenedetto

      Article first published online: 15 APR 2004 | DOI: 10.1002/pen.10237

    2. Melting model for modular self wiping co-rotating twin screw extruders (pages 727–740)

      Santosh Bawiskar and James L. White

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.10238

    3. Electrocapillary wave studies of different poly(dimethyl siloxane)s (pages 741–748)

      Yongsok Seo, Randy Skarlupka and Hyuk Yu

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.10239

    4. Influence of impurities on mechanical properties of recycled glass fiber reinforced polyamide 66 (pages 749–756)

      P.-A. Eriksson, A.-C. Albertsson, P. Boydell and J.-A. E. Månson

      Article first published online: 15 APR 2004 | DOI: 10.1002/pen.10240

    5. Study on the surface tensions of polymer melts using axisymmetric drop shape analysis (pages 757–764)

      D. Y. Kwok, L. K. Cheung, C. B. Park and A. W. Neumann

      Article first published online: 15 APR 2004 | DOI: 10.1002/pen.10241

    6. Effect of surface properties on the adhesion between PVC and wood veneer laminates (pages 765–773)

      Laurent M. Matuana, John J. Balatinecz and Chul B. Park

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.10242

  2. Review

    1. Top of page
    2. Articles
    3. Review
    4. Articles
    1. You have free access to this content
      Homogeneous and heterogeneous sulfonation of polymers: A review (pages 783–792)

      F. Kučera and J. Jančář

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.10244

  3. Articles

    1. Top of page
    2. Articles
    3. Review
    4. Articles
    1. Study on void formation in resin transfer molding (pages 809–818)

      Chih-Yuan Chang and Lih-Wu Hourng

      Article first published online: 15 APR 2004 | DOI: 10.1002/pen.10246

    2. The recovery behavior of crosslinked closed cell polyolefin foams (pages 831–837)

      M. A. Rodríguez-Pérez, S. Díez-Gutiérrez and J. A. De Saja

      Article first published online: 15 APR 2004 | DOI: 10.1002/pen.10248

    3. Effect of processing conditions on shrinkage in injection molding (pages 838–846)

      K. M. B. Jansen, D. J. Van Dijk and M. H. Husselman

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.10249

    4. The degradation of high impact polystyrene with and without starch in concentrated activated sludge (pages 863–869)

      C. F. Jasso G., L. J. González-Ortiz, R. Contreras J., E. Mendizábal M. and J. Mora G.

      Article first published online: 15 APR 2004 | DOI: 10.1002/pen.10252

    5. Thermoplastic bonding to metals via injection molding for macro-composite manufacture (pages 870–877)

      Karthik Ramani and Brendan Moriarty

      Article first published online: 15 APR 2004 | DOI: 10.1002/pen.10253

SEARCH

SEARCH BY CITATION