Polymer Engineering & Science

Cover image for Polymer Engineering & Science

September 1998

Volume 38, Issue 9

Pages 1359–1610

  1. Articles

    1. Top of page
    2. Articles
    1. The crystalline phase transformation of poly(vinylidene fluoride)/poly(vinyl fluoride) blend films (pages 1359–1365)

      Bong Shik Kim, Jae Yeon Lee and Roger S. Porter

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.10306

    2. Selective froth flotation of PVC from PVC/PET mixtures for the plastics recycling industry (pages 1378–1386)

      J. Drelich, T. Payne, J. H. Kim, J. D. Miller, R. Kobler and S. Christiansen

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.10308

    3. New models for rotational molding of plastics (pages 1387–1398)

      G. Gogos, L. G. Olson, X. Liu and V. R. Pasham

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.10309

    4. Experimental study and numerical simulation of the injection stretch/blow molding process (pages 1399–1412)

      F. M. Schmidt, J. F. Agassant and M. Bellet

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.10310

    5. Ethylene vinyl alcohol copolymer/high density polyethylene blends compatibilized through functionalization (pages 1420–1425)

      Seong Ho Park, Gun Joo Lee, Seung Soon Im and Kyung Do Suh

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.10312

    6. Steady shear and dynamic properties of biodegradable polyesters (pages 1426–1435)

      D. H. S. Ramkumar and M. Bhattacharya

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.10313

    7. Structural rearrangements during yielding of glassy polymers (pages 1443–1449)

      E. Kontou and G. Spathis

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.10315

    8. Optimal cooling system design for the injection molding process (pages 1450–1462)

      S. J. Park and T. H. Kwon

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.10316

    9. Liquid-crystallization induced reactions. Microstructure and morphology of copolyesters synthesized by transesterification of PET with some LCP monomers (pages 1491–1505)

      Maria Silvia Tonti, Marco Masseti, Giovanna Poli, Massimo Paci, Pierluigi Magagnini, Claudia Forte and Carlo Alberto Veracini

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.10320

    10. Indentation measurements using a dynamic mechanical analyzer (pages 1529–1535)

      Jason A. Payne, Angela Strojny, Lorraine F. Francis and William W. Gerberich

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.10323

    11. The interfacial tension between a thermotropic liquid crystalline copolyester and polyethersulfone: A comparison of methods (pages 1536–1548)

      A. G. C. Machiels, R. J. Busser, J. Van Dam and A. Posthuma De Boer

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.10324

    12. Phase behavior of blends of poly(ethylene terephthalate) with liquid-crystalline polymers (pages 1572–1586)

      Pierluigi Magagnini, Maria S. Tonti, Marco Masseti, Massimo Paci, Lilia I. Minkova and Tsenka T. Miteva

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.10328

    13. Experimental study of the transcription of minute width grooves by injection molding (II) (pages 1587–1593)

      Masaki Yoshii, Hiroki Kuramoto and Yuuji Ochiai

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.10329

SEARCH

SEARCH BY CITATION