Polymer Engineering & Science

Cover image for Polymer Engineering & Science

January 1999

Volume 39, Issue 1

Pages 1–209

  1. In Memoriam

    1. Top of page
    2. In Memoriam
    3. Articles
    1. In Memoriam (pages 1–2)

      R. A. Weiss and A. J. Lesser

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11391

  2. Articles

    1. Top of page
    2. In Memoriam
    3. Articles
    1. The effect of the addition of a low profile additive on the curing shrinkage of an unsaturated polyester resin (pages 18–25)

      C. J. Liu, M. S. Kiasat, A. H. J. Nijhof, H. Blokland and R. Marissen

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11393

    2. On a pure finite-element-based methodology for resin transfer molds filling simulations (pages 26–43)

      R. V. Mohan, N. D. Ngo and K. K. Tamma

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11394

    3. A hybrid 3D/2D finite element technique for polymer processing operations (pages 44–54)

      Yun-Wey Yu, Ta-Jo Liu, Chaug-Liang Hsu and Yeon-Sheug Yang

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11395

    4. Some thermodynamic and kinetic properties of the system PETG-CO2, and morphological characteristics of the CO2-blown PETG foams (pages 55–61)

      Y. Paul Handa, Betty Wong, Zhiyi Zhang, Vipin Kumar, Sharon Eddy and Kishan Khemani

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11396

    5. Study of “gas fingering” behavior in gas-assisted injection molding (pages 62–77)

      X. Lu, H. H. Chiang, L. Fong, J. Zhao and Shia Chung S. Chen

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11397

    6. An unsteady multifluid flow model: Application to sandwich injection molding process (pages 78–88)

      G. Schlatter, J. F. Agassant, M. Vincent and A. Davidoff

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11398

    7. Measurements and modeling of PS/supercritical CO2 solution viscosities (pages 99–109)

      Minhee Lee, Chul B. Park and Costas Tzoganakis

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11400

    8. Process-induced residual stresses in compression molded UHMWPE (pages 110–118)

      Keith Miller and Karthik Ramani

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11401

    9. Numerical simulation of three-dimensional viscoelastic flow within dies (pages 152–163)

      S. Kihara, T. Gouda, K. Matsunaga and K. Funatsu

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11404

    10. Formation of integral skin polyurethane foams (pages 164–176)

      V. K. Gupta and D. V. Khakhar

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11405

    11. Shear yield behavior of calcium carbonate–filled polypropylene (pages 190–198)

      Yeh Wang and Jyun-Jye Wang

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11407

    12. Water blown free rise polyurethane foams (pages 199–209)

      Debdarsan Niyogi, R. Kumar and K. S. Gandhi

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11408

SEARCH

SEARCH BY CITATION