Polymer Engineering & Science

Cover image for Polymer Engineering & Science

July 1999

Volume 39, Issue 7

Pages 1153–1343

  1. Articles

    1. Top of page
    2. Articles
    1. Mixed connectivity composite material characterization for electroactive sensors (pages 1176–1188)

      M. P. Wenger and D. K. Das-Gupta

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11504

    2. Bubble dissolution in molten polymers and its role in rotational molding (pages 1189–1198)

      M. Kontopoulou and J. Vlachopoulos

      Article first published online: 15 APR 2004 | DOI: 10.1002/pen.11505

    3. Properties of aminosilane grafted moisture curable poly(vinyl chloride) formulations (pages 1199–1206)

      O. S. Rodríguez Fernández and M. Gilbert

      Article first published online: 15 APR 2004 | DOI: 10.1002/pen.11506

    4. Integrated numerical modeling of the blow molding process (pages 1223–1233)

      D. Laroche, K. K. Kabanemi, L. Pecora and R. W. Diraddo

      Article first published online: 15 APR 2004 | DOI: 10.1002/pen.11509

    5. Interfacial tension of polypropylene/polystyrene: Degradation of polypropylene (pages 1251–1256)

      E. J. Visscher and R. C. Willemse

      Article first published online: 15 APR 2004 | DOI: 10.1002/pen.11512

    6. Modification of a Ziegler-Natta catalyst with a metallocene catalyst and its olefin polymerization behavior (pages 1257–1264)

      Tae Oan Ahn, Sung Chul Hong, Wan Soo Huh, Young-Chul Lee and Dong-Ho Lee

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11513

    7. Influence of triblock copolymer interfacial modifiers on fracture behavior of polystyrene/ethylene-propylene rubber blends (pages 1265–1278)

      Stephen Odje, Toan Vu-Khanh, Patrick Cigana and Basil D. Favis

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11514

    8. Analysis of an LDPE compact autoclave reactor by two-cell model with backflow (pages 1279–1290)

      Jinsuk Lee, Jae Yong Ham, Hyun-Ku Rhee, Kil Sang Chang and Jae Youn Kim

      Article first published online: 15 APR 2004 | DOI: 10.1002/pen.11515

    9. Optical monitoring of polypropylene injection molding (pages 1291–1302)

      Charles L. Thomas and Anthony J. Bur

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11516

    10. Polylactide (PLA)—a new way of production (pages 1311–1319)

      S. Jacobsen, H. G. Fritz, Ph. Degée, Ph. Dubois and R. Jérôme

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11518

SEARCH

SEARCH BY CITATION