Polymer Engineering & Science

Cover image for Polymer Engineering & Science

May 2000

Volume 40, Issue 5

Pages 1047–1262

  1. Articles

    1. Top of page
    2. Articles
    1. Rheological behavior of highly filled ethylene propylene diene rubber compounds (pages 1065–1073)

      M. G. Markovic, N. R. Choudhury, M. Dimopoulos, J. G. Matisons, N. K. Dutta and A. K. Bhattacharya

      Version of Record online: 8 APR 2004 | DOI: 10.1002/pen.11234

    2. In-line monitoring of polyethylene density using near infrared (NIR) spectroscopy (pages 1107–1113)

      Takefumi Nagata, Masahiro Ohshima and Masataka Tanigaki

      Version of Record online: 8 APR 2004 | DOI: 10.1002/pen.11238

    3. Blends of linear and branched polyethylenes (pages 1132–1142)

      Heon Sang Lee and Morton M. Denn

      Version of Record online: 8 APR 2004 | DOI: 10.1002/pen.11241

    4. Spatial and temporal control of the degree of cure in polymer composite structures (pages 1157–1164)

      P. J. Shull, D. H. Hurley, J. W. M. Spicer and J. B. Spicer

      Version of Record online: 8 APR 2004 | DOI: 10.1002/pen.11243

    5. Structure-property relationship in polyurethane elastomers containing starch as a crosslinker (pages 1200–1210)

      Sonal Desai, I. M. Thakore, B. D. Sarawade and Surekha Devi

      Version of Record online: 8 APR 2004 | DOI: 10.1002/pen.11247

    6. Improvement of the mechanical properties of chitosan films by the addition of poly(ethylene oxide) (pages 1211–1215)

      V. L. Alexeev, E. A. Kelberg, G. A. Evmenenko and S. V. Bronnikov

      Version of Record online: 8 APR 2004 | DOI: 10.1002/pen.11248

    7. On the properties and processing of polyethylene terephthalate/styrene-butadiene rubber blend (pages 1216–1225)

      A. Sánchez-Solís, M. R. Estrada, J. Cruz and O. Manero

      Version of Record online: 8 APR 2004 | DOI: 10.1002/pen.11249

    8. Production of injection molding tooling with conformal cooling channels using the three dimensional printing process (pages 1232–1247)

      Emanuel Sachs, Edward Wylonis, Samuel Allen, Michael Cima and Honglin Guo

      Version of Record online: 8 APR 2004 | DOI: 10.1002/pen.11251

    9. An experimental matrix design to optimize the weldline strength in injection molded parts (pages 1256–1262)

      Shih-Jung Liu, Jun-Yu Wu, Jer-Haur Chang and Shiu-Wan Hung

      Version of Record online: 8 APR 2004 | DOI: 10.1002/pen.11253

SEARCH

SEARCH BY CITATION