Polymer Engineering & Science

Cover image for Polymer Engineering & Science

July 2000

Volume 40, Issue 7

Pages 1505–1723

  1. Articles

    1. Top of page
    2. Articles
    1. Polystyrene microcellular plastic generation by quick-heating process at high temperature (pages 1510–1521)

      Sumarno, Tomoko Sunada, Yoshiyuki Sato, Shigeki Takishima and Hirokatsu Masuoka

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11280

    2. A preliminary investigation of conductive immiscible polymer blends as sensor materials (pages 1522–1528)

      S. Srivastava, R. Tchoudakov and M. Narkis

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11281

    3. Silane grafting and moisture crosslinking of polypropylene (pages 1534–1541)

      M. Beltraán and C. Mijangos

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11283

    4. Copolymerization of carbon dioxide and propylene oxide using various zinc glutarate derivatives as catalysts (pages 1542–1552)

      M. Ree, J. Y. Bae, J. H. Jung, T. J. Shin, Y.-T. Hwang and T. Chang

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11284

    5. Deformational behavior of polyolefins at high temperature and strain rate: Experimental analysis and constitutive laws (pages 1553–1563)

      Francesco Briatico-Vangosa, Marta Rink, Francesco D'Oria and Alberto Verzelli

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11285

    6. Elongational behavior of polyethylene melts—effect of deformation (pages 1571–1580)

      P. Micic and S. N. Bhattacharya

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11287

    7. Draft angle and surface roughness effects on stereolithography molds (pages 1581–1588)

      Thomas Cedorge and Jonathan Colton

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11288

    8. Molar mass of poly (ethylene terephthalate) (PET) during ultimate uniaxial drawing (pages 1596–1605)

      Ulrich Göschel and Paul J. C. H. Cools

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11290

    9. Synthesis of poly(2,5-di-n-butoxy-p-phenylene vinylene) and its application in light-emitting diodes (pages 1606–1610)

      Guojie Wang, Jingsong Huang, Min Li, Xinfang Chen and Shiyong Liu

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11291

    10. The effects of dual-orifice air-ring design on blown film cooling (pages 1611–1618)

      V. Sidiropoulos and J. Vlachopoulos

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11292

    11. Mechanical and thermal anisotropy for uniaxially and biaxially drawn PET (pages 1619–1627)

      John W. Ellis and J. J. C. Picot

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11293

    12. Effect of structure modification on rheological properties of biodegradable poly(ester-urethane) (pages 1655–1662)

      Antti Helminen, Janne Kylmä, Jukka Tuominen and Jukka V. Seppälä

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11297

    13. Surface tension of polyethylene used in thermal coating (pages 1663–1671)

      Nicole Raymonde Demarquette, Fabio Teodoro Da Silva, Sergio Duarte Brandi and Douglas Gouvêa

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11298

    14. Binary blends of metallocene polyethylene with conventional polyolefins: Rheological and morphological properties (pages 1672–1681)

      Hanjin Kwag, Dipak Rana, Kyucheol Cho, Jangweon Rhee, Taewoo Woo, Byung H. Lee and Soonja Choe

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11299

    15. Nature of contact between polymer and mold in injection molding. Part I: Influence of a non-perfect thermal contact (pages 1682–1691)

      D. Delaunay, P. Le Bot, R. Fulchiron, J. F. Luye and G. Regnier

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11300

    16. Influence of low molecular weight ABS species on properties of PC/ABS systems (pages 1701–1715)

      Roberto Greco and Michele Iavarone

      Article first published online: 8 APR 2004 | DOI: 10.1002/pen.11302

SEARCH

SEARCH BY CITATION