Polymer Engineering & Science

Cover image for Polymer Engineering & Science

December 2001

Volume 41, Issue 12

Pages 2065–2280

  1. Articles

    1. Top of page
    2. Articles
    1. Propylene polymerization in a semibatch reactor. Analysis of soluble metallocene catalyst behavior through reactor modeling (pages 2082–2094)

      P. G. Belelli, M. L. Ferreira, M. H. Lacunza, D. E. Damiani and A. Brandolin

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10904

    2. Converging flow analysis, entrance pressure drops, and vortex sizes: Measurements and calculated values (pages 2095–2107)

      Christian Carrot, Jacques Guillet and René Fulchiron

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10905

    3. Optimization of a batch reactor to produce the elastomeric copolyester prepolymer copoly(ethylene-polyoxyethylene terephthalate)(CEPT) (pages 2126–2136)

      Cornelio De La Cruz-Guerra, Miguel A. Hernández-Rivera and M. Javier Cruz-Gómez

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10907

    4. Polytetrafluoroethylene decomposition in air and nitrogen (pages 2137–2147)

      J. A. Conesa and R. Font

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10908

    5. Dispersion of graphite nanosheets in a polymer matrix and the conducting property of the nanocomposites (pages 2148–2154)

      Guo-Hua Chen, Da-Jun Wu, Wen-Gui Weng and Wen-Li Yan

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10909

    6. Effect of maleic anhydride graft ratio on mechanical properties and morphology on nylon 11/ethylene-octene copolymer blends (pages 2155–2161)

      Qi Fang Li, Dong Gil Kim, De Zhen Wu, Kun Lu and Ri Guang Jin

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10910

    7. Microlayer coextrusion as a route to innovative blend structures (pages 2162–2171)

      D. Jarus, A. Hiltner and E. Baer

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10911

    8. Melt rheology of poly(lactic acid): Consequences of blending chain architectures (pages 2172–2184)

      Hans J. Lehermeier and John R. Dorgan

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10912

    9. Effect of interdiffusion regions on penetrant flux through multilayer films (pages 2185–2193)

      Shilpa Y. Sankhe, Douglas E. Hirt and David A. Zumbrunnen

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10913

    10. Direct measurement of permeabilities at high pressures (pages 2200–2205)

      D. R. Wiff and J. F. Roach

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10915

    11. Effect of processing variables on the linear viscoelastic properties of SBS-oil blends (pages 2216–2225)

      F. J. Navarro, F. J. Martínez-Boza, P. Partal, C. Gallegos, M. E. Muñoz, J. Areizaga, J. Areizaga and A. Santamaría

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10917

    12. In-line versus off-line rheological measurements on S-PVC formulations releant for flow in extrusion dies (pages 2231–2248)

      Terje Glomsaker, Einar L. Hinrichsen and Pål Thorsteinsen

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10919

    13. Supercritical CO2 welding of laminated linear low density polyethylene films (pages 2259–2265)

      Terrence Caskey, Alan J. Lesser and Thomas J. McCarthy

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10921

    14. Influence of fillers and oil on mill processability of brominated isobutylene-co-paramethylstyrene and its blends with EPDM (pages 2266–2280)

      Bhuwneesh Kumar, P. P. De, S. K. De, A. K. Bhowmick, S. Majumdar and D. G. Peiffer

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10922

SEARCH

SEARCH BY CITATION