Polymer Engineering & Science

© 2013 Society of Plastics Engineers

Cover image for Polymer Engineering & Science

September 2001

Volume 41, Issue 9

Pages 1457–1653

  1. Articles

    1. Top of page
    2. Articles
    1. Review: Recycling of nylon from carpet waste (pages 1457–1470)

      Corina Mihut, Dinyar K. Captain, Francis Gadala-Maria and Michael D. Amiridis

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10845

    2. A review on interface modification and characterization of natural fiber reinforced plastic composites (pages 1471–1485)

      Jayamol George, M. S. Sreekala and Sabu Thomas

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10846

    3. Reactive blending of functionalized acrylic rubbers and epoxy resins (pages 1486–1496)

      C. Dispenza, G. Spadaro, J. T. Carter and P. T. McGrail

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10847

    4. Measuring Tg in ultra-thin polymer films with an excimer fluorescence technique (pages 1497–1505)

      C. C. White, K. B. Migler and W. L. Wu

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10848

    5. Rheology of blends of a thermotropic liquid crystalline polymer with polyphenylene sulfide (pages 1506–1513)

      Minsoo Han, Woo Nyon Kim and David W. Giles

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10849

    6. Preparation and characterization of polyimide nanocomposites with different organo-montmorillonites (pages 1514–1520)

      Jin-Hae Chang, Kwang Min Park, Donghwan Cho, Hee Sam Yang and Kyo Jin Ihn

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10850

    7. Crystallization kinetics by differential scanning calorimetry for PCL/starch and their reinforced sisal fiber composites (pages 1521–1528)

      Viviana P. Cyras, Analía Vázquez and José M. Kenny

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10851

    8. Studies of the aging of nafion®/silicate nanocomposites using 29Si solid state NMR spectroscopy (pages 1529–1539)

      S. K. Young, W. L. Jarrett and K. A. Mauritz

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10852

    9. High internal phase emulsion foams: Copolymers and interpenetrating polymer networks (pages 1540–1552)

      Huiwen Tai, Anatoly Sergienko and Michael S. Silverstein

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10853

    10. Thermoforming shrinkage prediction (pages 1553–1563)

      Haihong Xu and David O. Kazmer

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10854

    11. Viscoelastic simulation of film casting process for a polymer melt (pages 1564–1579)

      Naoki Satoh, Hideki Tomiyama and Toshihisa Kajiwara

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10855

    12. Increase of photoluminescence from fullerene-doped polymers under laser irradiation (pages 1580–1588)

      G. Z. Li, N. Minami and Y. Ichio

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10856

    13. Evaluation of the derivatives of the strain energy function with respect to strain invariants for carbon black–filled EPDM (pages 1589–1596)

      P. A. Kakavas

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10857

    14. Kinetics of isothermal and non-isothermal crystallization of poly(butylene terephthalate)/ liquid crystalline polymer blends (pages 1597–1615)

      A. K. Kalkar and A. A. Deshpande

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10858

    15. Thermal behavior of poly(dimethyl itaconate) and poly(di-n-butyl itaconate) copolymerized with methyl methacrylate (pages 1616–1625)

      Marta Fernández-Garcia, José Luis De La Fuente and Enrique López Madruga

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10859

    16. NIR, DSC, and FTIR as quantitative methods for compositional analysis of blends of polymers obtained from recycled mixed plastic waste (pages 1626–1635)

      Walker Camacho and Sigbritt Karlsson

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10860

    17. The effect of the feed section groove taper angle on the performance of a single-screw extruder (pages 1636–1643)

      Janusz W. Sikora

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10861

    18. On-line measurement of polymer orientation using ultrasonic technology (pages 1644–1653)

      Russ Edwards and Charles Thomas

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10862

SEARCH

SEARCH BY CITATION