Polymer Engineering & Science

Cover image for Polymer Engineering & Science

February 2002

Volume 42, Issue 2

Pages 249–472

  1. Articles

    1. Top of page
    2. Articles
    1. Phase separation and gelation of epoxy resin/hyperbranched polymer blends (pages 249–257)

      Raffaele Mezzenga, Andrè Luciani and Jan-Anders E. Månson

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10945

    2. Numerical analysis of surface-tension-driven coating flow (pages 258–268)

      Richard H. J. Blunk and James O. Wilkes

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10946

    3. The effect of stoichiometry on the fracture toughness of a liquid crystalline epoxy (pages 269–279)

      Elizabeth J. Robinson, Elliot P. Douglas and John J. Mecholsky Jr.

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10947

    4. Plasma surface treatments of melt-extruded sheets of poly(L-lactic acid) (pages 299–306)

      Toshihiro Hirotsu, Kazuo Nakayama, Toshiyuki Tsujisaka, Andre Mas and Francois Schue

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10949

    5. Verification of extensional viscosity effects in injection mold filling simulation (pages 307–325)

      James C. Moller and Daeyong Lee

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10950

    6. Effect of polymer matrix on the rheology of hydroxyapatite-filled polyethylene composites (pages 326–335)

      R. Joseph, W. J. McGregor, M. T. Martyn, K. E. Tanner, P. D. Coates and W. Bonfield

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10951

    7. Polyimide and nylon 6 blend film: Preparation, characterization and thermal behavior (pages 336–345)

      Sobhan Niyogi, Sukumar Maiti and Basudam Adhikari

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10952

    8. Extrusion blow molding of long fiber reinforced polyolefins (pages 346–364)

      A. Garcia-Rejon, A. Meddad, E. Turcott and M. Carmel

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10953

    9. Moisture diffusion behavior in bismaleimide resin subjected to hygrothermal cycling (pages 375–381)

      Yanmei Li, John Miranda and Hung-Jue Sue

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10955

    10. Investigation of appropriate cooling times for electrofusion jointing of PE pipes for gas distribution (pages 382–394)

      Yuji Higuchi, Hiroyuki Nishimura, Fumio Inoue, Tetsuo Ishikawa and Seiji Miyaki

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10956

    11. Analysis of multiaxial impact behavior of polymers (pages 395–402)

      Y. Duan, A. Saigal, R. Greif and M. A. Zimmerman

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10957

    12. Particle motion in the fountain flow region during filling of a tube with a viscoelastic fluid (pages 403–412)

      Venkata Giri Kolli, Shem O. Ogadhoh, Steve M. Abel, Francis Gadala-Maria and Thanasis D. Papathanasiou

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10958

    13. Interlaminar contact development during thermoplastic fusion bonding (pages 424–438)

      F. Yang and R. Pitchumani

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10960

SEARCH

SEARCH BY CITATION