Polymer Engineering & Science

Cover image for Polymer Engineering & Science

March 2002

Volume 42, Issue 3

Pages 473–662

  1. Articles

    1. Top of page
    2. Articles
    1. A theoretical approach to solid filler dispersion in a twin-screw extruder (pages 473–481)

      F. Berzin, B. Vergnes, P. G. Lafleur and M. Grmela

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10964

    2. Gross melt fracture of polyethylene. II: Effects of molecular structure (pages 495–503)

      Seungoh Kim and John M. Dealy

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10966

    3. Hot embossing in microfabrication. Part I: Experimental (pages 539–550)

      Yi-Je Juang, L. James Lee and Kurt W. Koelling

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10970

    4. Hot embossing in microfabrication. Part II: Rheological characterization and process analysis (pages 551–566)

      Yi-Je Juang, L. James Lee and Kurt W. Koelling

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10971

    5. Experimental investigation of the cure-dependent response of vinyl ester resin (pages 582–590)

      F. Flores, J. W. Gillespie Jr and T. A. Bogetti

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10973

    6. The payne effect for particle-reinforced elastomers (pages 591–604)

      Aleksey D. Drozdov and Al Dorfmann

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10974

    7. Effect of graft ratio on the dynamic moduli of acrylonitrile-butadiene-styrene copolymer (pages 605–610)

      Kyung Hyun Ahn, Doo Han Ha, Byung Do Lee, Jae Goo Doh and Jin Hwan Choi

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10975

    8. Flow through a convergence. Part 1: Critical conditions for unstable flow (pages 611–633)

      Mika Meller, André Luciani, Alp Sarioglu and Jan-Anders E. Månson

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10976

    9. Flow through a convergence. Part 2: Mixing of high viscosity ratio polymer blends (pages 634–653)

      Mika Meller, André Luciani and Jan-Ander. E. Mårnson

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10977

    10. The flow of polymer melts through the clearance over a barrier flight in extruders (pages 654–662)

      Bo Ki Hong, Hyun Seog Kim and Chan I. Chung

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10978

SEARCH

SEARCH BY CITATION