Polymer Engineering & Science

Cover image for Polymer Engineering & Science

February 2003

Volume 43, Issue 2

Pages 267–518

  1. Articles

    1. Top of page
    2. Articles
    1. Effect of ground fluororubber vulcanizate powder on the properties of fluororubber compound (pages 267–278)

      Arun Ghosh, A. K. Bhattacharya, A. K. Bhowmick and S. K. De

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10023

    2. Recycling of silicone rubber waste: Effect of ground silicone rubber vulcanizate powder on the properties of silicone rubber (pages 279–296)

      Arun Ghosh, R. S. Rajeev, A. K. Bhattacharya, A. K. Bhowmick and S. K. De

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10024

    3. Influence of chemical composition on the rheological behavior of condensation reaction resins (pages 297–305)

      M. Doyle, P.-O. Hagstrand, J.-Å. E. Månson, L. Svensson and S. Lundmark

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10025

    4. Rheological properties of hyperbranched polymer/poly(ethylene terephthalate) reactive blends (pages 329–343)

      Seung Bum Kil, Yannick Augros, Yves Leterrier, Jan-Anders E. Månson, Andreas Christel and Camille Borer

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10028

    5. On the dynamic mechanical behavior of polyimides based on aromatic and alicyclic dianhydrides (pages 344–355)

      Corine Bas, Cécile Tamagna, Thierry Pascal and N. Dominique Alberola

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10029

    6. Dynamic modeling of blown-film extrusion (pages 398–418)

      J. Carl Pirkle Jr. and Richard D. Braatz

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10033

    7. Environmental stress cracking (ESC) of plastics caused by non-ionic surfactants (pages 419–430)

      Takafumi Kawaguchi, Hiroyuki Nishimura, Keiichi Kasahara, Takashi Kuriyama and Ikuo Narisawa

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10034

    8. Attenuating PP/PET bicomponent melt blown microfibers (pages 463–469)

      Rongguo Zhao and Larry C. Wadsworth

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10037

    9. Effect of CO2 on crystallization kinetics of poly(ethylene terephthalate) (pages 479–489)

      Mitsuko Takada and Masahiro Ohshima

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10039

    10. Mechanical properties of low nano-silica filled high density polyethylene composites (pages 490–500)

      Ming Qiu Zhang, Min Zhi Rong, Hai Bo Zhang and Klaus Friedrich

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10040

    11. Mechanical behavior of a semicrystalline polymer before necking. Part II: Modeling of uniaxial behavior (pages 501–518)

      N. Brusselle-Dupend, D. Lai, X. Feaugas, M. Guigon and M. Clavel

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10041

SEARCH

SEARCH BY CITATION