Polymer Engineering & Science

Cover image for Polymer Engineering & Science

June 2003

Volume 43, Issue 6

Pages 1163–1344

  1. Articles

    1. Top of page
    2. Articles
    1. Free-radical solution polymerization of styrene in a tubular reactor—effects of recycling (pages 1163–1179)

      P. A. Cabral, P. A. Melo, E. C. Biscaia Jr., E. L. Lima and J. C. Pinto

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10099

    2. Effect of die temperature on the morphology of microcellular foams (pages 1206–1220)

      Xiangmin Han, Kurt W. Koelling, David L. Tomasko and L. James Lee

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10102

    3. Study on the phase behavior of EVA/PS blends during in situ polymerization (pages 1221–1231)

      Shih-Kai Cheng, Cheng-Chien Wang and Chuh-Yung Chen

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10103

    4. Synthesis and characterization of new aromatic polyimides containing well-defined conjugation units (pages 1232–1240)

      T. J. Shin, H. K. Park, S. W. Lee, B. Lee, W. Oh, J.-S. Kim, S. Baek, Y.-T. Hwang, H.-C. Kim and M. Ree

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10104

    5. Starch-filled ternary polymer composites. I: Dynamic mechanical properties (pages 1250–1260)

      S. St. Lawrence, P. S. Walia and J. L. Willett

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10106

    6. Extrusion of polystyrene nanocomposite foams with supercritical CO2 (pages 1261–1275)

      Xiangmin Han, Changchun Zeng, L. James Lee, Kurt W. Koelling and David L. Tomasko

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10107

    7. Reactive melt modification of polypropylene with a crosslinkable polyester (pages 1276–1288)

      C. Wan, S. H. Patel and M. Xanthos

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10108

    8. TOF-SIMS study of injection-molded polystyrene (pages 1289–1297)

      Francesco Pisciotti, Jukka Lausmaa, Antal Boldizar and Mikael Rigdahl

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10109

    9. Morphology and properties of PBT/nylon 6/EVA-g-MAH ternary blends prepared by reactive extrusion (pages 1298–1311)

      Seon-Joon Kim, Dong-Keun Kim, Won-Jei Cho and Chang-Sik Ha

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10110

    10. Preparation and properties of polyethylene-clay hybrids (pages 1312–1316)

      M. Kato, H. Okamoto, N. Hasegawa, A. Tsukigase and A. Usuki

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10111

    11. Production, properties and impact toughness of die-drawn toughened polypropylenes (pages 1317–1336)

      J. Mohanraj, N. Chapleau, A. Ajji, R. A. Duckett and I. M. Ward

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10112

    12. Effect of dissolved gas on the viscosity of HIPS in the manufacture of microcellular plastics (pages 1337–1344)

      Tae-Hyong Chong, Young-Wook Ha and Dae-Jin Jeong

      Article first published online: 7 APR 2004 | DOI: 10.1002/pen.10113

SEARCH

SEARCH BY CITATION