Polymer Engineering & Science

Cover image for Polymer Engineering & Science

December 2004

Volume 44, Issue 12

Pages 2165–2352

  1. Articles

    1. Top of page
    2. Articles
    1. Influences of hot stretch ratio on essential work of fracture of in-situ microfibrillar poly(ethylene terephthalate)/polyethylene blends (pages 2165–2173)

      Zhong-Ming Li, Bang-Hu Xie, Rui Huang, Xiang-Ping Fang and Ming-Bo Yang

      Article first published online: 24 NOV 2004 | DOI: 10.1002/pen.20244

    2. Morphology and mechanical properties of injection molded poly(ethylene terephthalate) (pages 2174–2184)

      Júlio C. Viana, Natália M. Alves and João F. Mano

      Article first published online: 24 NOV 2004 | DOI: 10.1002/pen.20245

    3. Temporary networks in polymer-modified asphalts (pages 2185–2193)

      Giovanni Polacco, Jiri Stastna, Zora Vlachovicova, Dario Biondi and Ludovit Zanzotto

      Article first published online: 24 NOV 2004 | DOI: 10.1002/pen.20246

    4. Design of calibrators for extruded profiles. Part I: Modeling the thermal interchanges (pages 2216–2228)

      J. M. Nóbrega, O. S. Carneiro, J. A. Covas, F. T. Pinho and P. J. Oliveira

      Article first published online: 24 NOV 2004 | DOI: 10.1002/pen.20249

    5. Cyclic deformation behavior of an epoxy polymer. Part I: Experimental investigation (pages 2240–2246)

      Xinghe Shen, Zihui Xia and Fernand Ellyin

      Article first published online: 24 NOV 2004 | DOI: 10.1002/pen.20251

    6. Fate of erucamide in polyolefin films at elevated temperature (pages 2247–2253)

      Christopher A. Shuler, Amol V. Janorkar and Douglas E. Hirt

      Article first published online: 24 NOV 2004 | DOI: 10.1002/pen.20252

    7. A time-scale approach for analysis of coalescence in processing flows (pages 2254–2265)

      Jairo E. Perilla and Sadhan C. Jana

      Article first published online: 24 NOV 2004 | DOI: 10.1002/pen.20253

    8. Extrusion of broad-molecular-weight-distribution polyethylenes (pages 2266–2273)

      Rajendra K. Krishnaswamy, David C. Rohlfing, Ashish M. Sukhadia and Kevin R. Slusarz

      Article first published online: 24 NOV 2004 | DOI: 10.1002/pen.20254

    9. Isothermal and nonisothermal crystallization kinetics of syndiotactic polystyrene/clay nanocomposites (pages 2288–2297)

      Tzong-Ming Wu, Sung-Fu Hsu, Cheng-Fung Chien and Jeng-Yue Wu

      Article first published online: 24 NOV 2004 | DOI: 10.1002/pen.20256

    10. Temperature control of injection molding. Part I: Modeling and identification (pages 2308–2317)

      Chris Diduch, Rickey Dubay and Wan Gui Li

      Article first published online: 24 NOV 2004 | DOI: 10.1002/pen.20258

    11. Studies on impact-modified nylon 6/ABS blends (pages 2340–2345)

      H. T. Chiu and Y. K. Hsiao

      Article first published online: 24 NOV 2004 | DOI: 10.1002/pen.20262

    12. Study of the miscibility and mechanical properties of NBR/HNBR blends (pages 2346–2352)

      Ibnelwaleed A. Hussein, Rehan A. Chaudhry and Basel F. Abu Sharkh

      Article first published online: 24 NOV 2004 | DOI: 10.1002/pen.20263

SEARCH

SEARCH BY CITATION