Polymer Engineering & Science

Cover image for Polymer Engineering & Science

May 2004

Volume 44, Issue 5

Pages 825–1002

  1. Articles

    1. Top of page
    2. Articles
    1. Mechanical response and rheological properties of polycarbonate layered-silicate nanocomposites (pages 825–837)

      Alex J. Hsieh, Paul Moy, Frederick L. Beyer, Phil Madison, Eugene Napadensky, Jiaxiang Ren and Ramanan Krishnamoorti

      Article first published online: 2 JUN 2004 | DOI: 10.1002/pen.20074

    2. The design and performance of a new miniature mixer for specialty polymer blends and nanocomposites (pages 868–879)

      Orna Breuer, Uttandaraman Sundararaj and Roger W. Toogood

      Article first published online: 2 JUN 2004 | DOI: 10.1002/pen.20078

    3. Effect of filler dispersion on polypropylene morphology (pages 880–890)

      T. Lozano, P. G. Lafleur, M. Grmela and C. Thibodeau

      Article first published online: 2 JUN 2004 | DOI: 10.1002/pen.20079

    4. Cure characteristics, mechanical properties, and morphological studies of linoleum flour-filled NBR compounds (pages 909–916)

      J. Biagiotti, A. Iannoni, M. A. Lopez-Manchado and J. M. Kenny

      Article first published online: 2 JUN 2004 | DOI: 10.1002/pen.20082

    5. Optimal process conditions of shrinkage and warpage of thin-wall parts (pages 917–928)

      S. J. Liao, D. Y. Chang, H. J. Chen, L. S. Tsou, J. R. Ho, H. T. Yau, W. H. Hsieh, James T. Wang and Y. C. Su

      Article first published online: 2 JUN 2004 | DOI: 10.1002/pen.20083

    6. Fracture behavior at partially miscible polymer interfaces (pages 929–939)

      Russell E. Gorga and Balaji Narasimhan

      Article first published online: 2 JUN 2004 | DOI: 10.1002/pen.20084

    7. Thickness uniformity of HDPE blown film: Relation to rheological properties and density (pages 965–972)

      Hiroyuki Higuchi, Shinjiro Fujikawa, Mikio Sato and Kiyohito Koyama

      Article first published online: 2 JUN 2004 | DOI: 10.1002/pen.20088

    8. The effect of long chain branching on the processability of polypropylene in thermoforming (pages 973–982)

      A. D. Gotsis, B. L. F. Zeevenhoven and A. H. Hogt

      Article first published online: 2 JUN 2004 | DOI: 10.1002/pen.20089

SEARCH

SEARCH BY CITATION