Polymer Engineering & Science

Cover image for Polymer Engineering & Science

July 2004

Volume 44, Issue 7

Pages 1197–1403

  1. Preface

    1. Top of page
    2. Preface
    3. Articles
    4. Erratum
    1. Preface (page 1197)

      L. A. Utracki and K. C. Cole

      Version of Record online: 26 JUL 2004 | DOI: 10.1002/pen.20113

  2. Articles

    1. Top of page
    2. Preface
    3. Articles
    4. Erratum
    1. Development of a new production method for a polypropylene-clay nanocomposite (pages 1205–1211)

      Makoto Kato, Mitsumasa Matsushita and Kenzo Fukumori

      Version of Record online: 26 JUL 2004 | DOI: 10.1002/pen.20115

    2. Polyolefin nanocomposites: Formulation and development (pages 1212–1219)

      M.-T. Ton-That, F. Perrin-Sarazin, K. C. Cole, M. N. Bureau and J. Denault

      Version of Record online: 26 JUL 2004 | DOI: 10.1002/pen.20116

    3. Morphology of EVA based nanocomposites under shear and extensional flow (pages 1220–1230)

      Ranjit Prasad, Vanja Pasanovic-Zujo, Rahul K. Gupta, Ferenc Cser and Sati N. Bhattacharya

      Version of Record online: 26 JUL 2004 | DOI: 10.1002/pen.20117

    4. Hybrid organic inorganic nylon-6/SiO2 nanocomposites: Transport properties (pages 1240–1246)

      Monserrat García, Jonathan Barsema, Ramon E. Galindo, Daniele Cangialosi, Javier Garcia-Turiel, Werner E. van Zyl, Henk Verweij and Dave H. A. Blank

      Version of Record online: 26 JUL 2004 | DOI: 10.1002/pen.20119

    5. Dispersion, temperature and torque models for an internal mixer (pages 1247–1257)

      J. R. Campanelli, C. Gurer, T. L. Rose and J. E. Varner

      Version of Record online: 26 JUL 2004 | DOI: 10.1002/pen.20120

    6. Modeling of polymer melting, drop deformation, and breakup under shear flow (pages 1258–1266)

      Hongbing Chen, Uttandaraman Sundararaj and K. Nandakumar

      Version of Record online: 26 JUL 2004 | DOI: 10.1002/pen.20121

    7. Environmental stress cracking of a chemical nature in a PBT/PBA co-poly(ester ester) (pages 1319–1327)

      N. B. Kuipers, A. C. Riemslag, R. F. M. Lange, M. Janssen, A. Bakker and R. Marissen

      Version of Record online: 26 JUL 2004 | DOI: 10.1002/pen.20127

    8. On the effect of pressure on the shear and elongational viscosities of polymer melts (pages 1328–1337)

      Tomas Sedlacek, Martin Zatloukal, Petr Filip, Antal Boldizar and Petr Saha

      Version of Record online: 26 JUL 2004 | DOI: 10.1002/pen.20128

    9. Rubber plasticizers from degraded/devulcanized scrap rubber: A method of recycling waste rubber (pages 1338–1350)

      Amiya R. Tripathy, Drew E. Williams and Richard J. Farris

      Version of Record online: 26 JUL 2004 | DOI: 10.1002/pen.20129

    10. Free volume changes in mechanically milled PS and PC studied by positron annihilation lifetime spectroscopy (PALS) (pages 1351–1359)

      K. Günther-Schade, H. L. Castricum, H. J. Ziegler, H. Bakker and F. Faupel

      Version of Record online: 26 JUL 2004 | DOI: 10.1002/pen.20130

    11. Uniaxial stretching of poly(keto-ether-imide) films (pages 1360–1367)

      J. A. Hinkley, J. F. Dezern, L. Feuz and D. Klinedinst

      Version of Record online: 26 JUL 2004 | DOI: 10.1002/pen.20131

    12. Simulation of PTFE sintering: Thermal stresses and deformation behavior (pages 1368–1378)

      Luca Andena, Marta Rink and Fabio Polastri

      Version of Record online: 26 JUL 2004 | DOI: 10.1002/pen.20132

    13. Experiments and flow analysis of a micropelletizing die (pages 1391–1402)

      M. R. Thompson, C. Xi, E. Takacs, M. Tate and J. Vlachopoulos

      Version of Record online: 26 JUL 2004 | DOI: 10.1002/pen.20134

  3. Erratum

    1. Top of page
    2. Preface
    3. Articles
    4. Erratum
    1. You have free access to this content
      Erratum (page 1403)

      Version of Record online: 26 JUL 2004 | DOI: 10.1002/pen.20135

SEARCH

SEARCH BY CITATION