Polymer Engineering & Science

Cover image for Polymer Engineering & Science

September 2004

Volume 44, Issue 9

Pages 1605–1809

  1. Articles

    1. Top of page
    2. Articles
    1. A model-based virtual sensing approach for the injection molding process (pages 1605–1614)

      J.-W. John Cheng, Tzu-Ching Chao, Lih-Harng Chang and Bo-Feng Huang

      Version of Record online: 28 SEP 2004 | DOI: 10.1002/pen.20158

    2. Surface texture characterization of injection-molded pigmented plastics (pages 1615–1626)

      Ingrid Ariño, Ulf Kleist, Gustavo Gil Barros, Per-Åke Johansson and Mikael Rigdahl

      Version of Record online: 28 SEP 2004 | DOI: 10.1002/pen.20159

    3. Rheo-kinetic measurement of thermoplastic polyurethane polymerization in a measurement kneader (pages 1648–1655)

      V. W. A. Verhoeven, M. P. Y. Van Vondel, K. J. Ganzeveld and L. P. B. M. Janssen

      Version of Record online: 28 SEP 2004 | DOI: 10.1002/pen.20163

    4. Flow-induced morphology of cast polypropylene (pages 1656–1661)

      Bo Yin, Wei Yang, Qing-shun Yu and Ming-bo Yang

      Version of Record online: 28 SEP 2004 | DOI: 10.1002/pen.20164

    5. Hot-fillable containers containing PET/PEN copolymers and blends (pages 1670–1675)

      A. Ophir, S. Kenig, A. Shai, Y. Barka'ai and J. Miltz

      Version of Record online: 28 SEP 2004 | DOI: 10.1002/pen.20166

    6. Spectroscopic, transport, and morphological studies of polyaniline doped with inorganic acids (pages 1676–1681)

      Milind V. Kulkarni, Annamraju Kasi Viswanath, R. Marimuthu and Tanay Seth

      Version of Record online: 28 SEP 2004 | DOI: 10.1002/pen.20167

    7. Synthesis and non-isothermal crystallization behavior of poly(ethylene phthalate-co-terephthalate)s (pages 1682–1691)

      Byeongdu Lee, Jin Won Lee, Seung Woo Lee, Jinhwan Yoon and Moonhor Ree

      Version of Record online: 28 SEP 2004 | DOI: 10.1002/pen.20168

    8. Effects of ZnO nano particles on thermal stabilization of polymers (pages 1702–1706)

      Kwang Soo Cho, Jung-Il. Hong and Chan I. Chung

      Version of Record online: 28 SEP 2004 | DOI: 10.1002/pen.20170

    9. Essential work of fracture of rubber-modified polyamide 6 in impact (pages 1707–1715)

      Emiliano Lievana, Celina Bernal and Patricia Frontini

      Version of Record online: 28 SEP 2004 | DOI: 10.1002/pen.20171

    10. Stress relaxation in low-shrink-force polyolefin films (pages 1716–1720)

      Arthur L. Bobovitch, Ami Sagron, Yakov Unigovski, Albert Jarashneli and Emmanuel M. Gutman

      Version of Record online: 28 SEP 2004 | DOI: 10.1002/pen.20172

    11. Injection moldability and properties of compatibilized PA6/LDPE blends (pages 1732–1737)

      L. Canfora, S. Filippi and F. P. La Mantia

      Version of Record online: 28 SEP 2004 | DOI: 10.1002/pen.20174

    12. Relating the molecular structure and crystallization behavior of polypropylene (pages 1749–1754)

      Jianfeng Chen, Li Yin, Xiaoniu Yang and Enle Zhou

      Version of Record online: 28 SEP 2004 | DOI: 10.1002/pen.20176

    13. Rheological aspects of blends of metallocene-catalyzed atactic polypropylenes with bitumen (pages 1792–1799)

      Elena Rojo, Merche Fernández, Juan José Peña, Begoña Peña, M. E. Muñoz and A. Santamaría

      Version of Record online: 28 SEP 2004 | DOI: 10.1002/pen.20181

SEARCH

SEARCH BY CITATION