Polymer Engineering & Science

Cover image for Polymer Engineering & Science

December 2005

Volume 45, Issue 12

Pages 1557–1679

  1. Articles

    1. Top of page
    2. Articles
    1. Effects of injection-molding conditions on the gloss and color of pigmented polypropylene (pages 1557–1567)

      Francesco Pisciotti, Antal Boldizar, Mikael Rigdahl and Ingrid Ariño

      Article first published online: 10 OCT 2005 | DOI: 10.1002/pen.20358

    2. Properties of polypropylene/aluminum trihydroxide composites containing nanosized organoclay (pages 1568–1575)

      Noora Ristolainen, Ulla Hippi, Jukka Seppälä, Antti Nykänen and Janne Ruokolainen

      Article first published online: 10 OCT 2005 | DOI: 10.1002/pen.20367

    3. Dielectric properties of an epoxy-amine system at a high microwave frequency (pages 1576–1580)

      Liming Zong, Shuangjie Zhou, Nikki Sgriccia, Martin C. Hawley, Rensheng Sun and Leo C. Kempel

      Article first published online: 12 OCT 2005 | DOI: 10.1002/pen.20345

    4. Weld lines in nylon 6 melt-blended nanocomposites (pages 1606–1614)

      J. Tung, G.P. Simon and G.H. Edward

      Article first published online: 20 OCT 2005 | DOI: 10.1002/pen.20455

    5. Hydrocarbon stability of perfluorinated polyether rubbers at elevated temperatures (pages 1622–1629)

      D.M. Bigg, K.J. Heater, T.L. Skidmore and M. Arai

      Article first published online: 24 OCT 2005 | DOI: 10.1002/pen.20379

    6. The effect of the volume fraction of dispersed phase on toughness of injection molded polypropylene blended with SEBS, SEPS, and SEP (pages 1630–1638)

      Yushi Matsuda, Masao Hara, Tsuyoshi Mano, Kenzo Okamoto and Masaru Ishikawa

      Article first published online: 26 OCT 2005 | DOI: 10.1002/pen.20298

    7. Effect of CO2 sorption and desorption on the creep response of polycarbonate (pages 1639–1644)

      Arun Pasricha, Gregory Wing, Vipin Kumar, Mark Tuttle and Karl Seeler

      Article first published online: 26 OCT 2005 | DOI: 10.1002/pen.20366

    8. Injection molding-induced morphology of thermoplastic polymer blends (pages 1655–1665)

      Gan-Ji Zhong and Zhong-Ming Li

      Article first published online: 26 OCT 2005 | DOI: 10.1002/pen.20448

SEARCH

SEARCH BY CITATION