Polymer Engineering & Science

Cover image for Polymer Engineering & Science

June 2005

Volume 45, Issue 6

Pages 755–887

  1. Articles

    1. Top of page
    2. Articles
    1. Effects of nano- and micro-fillers and processing parameters on injection-molded microcellular composites (pages 773–788)

      Mingjun Yuan, Andreas Winardi, Shaoqin Gong and Lih-Sheng Turng

      Article first published online: 13 APR 2005 | DOI: 10.1002/pen.20327

    2. Comparison of experimental and analytical vibration welding meltdown-time profiles for nylon 66 and polypropylene (pages 789–797)

      P.J. Bates, J. MacDonald, V. Sidiropoulos and M. Kontopoulou

      Article first published online: 15 APR 2005 | DOI: 10.1002/pen.20333

    3. Recycling of PVC/PU waste and reuse in PVC formulations: Structure-property relationship (pages 801–808)

      O. Grigoryeva, A. Fainleib, L. Stepanenko, L. Sergeeva and P. Pissis

      Article first published online: 15 APR 2005 | DOI: 10.1002/pen.20343

    4. Lignin plasticization to improve binderless fiberboard mechanical properties (pages 809–816)

      J. Bouajila, A. Limare, C. Joly and P. Dole

      Article first published online: 15 APR 2005 | DOI: 10.1002/pen.20342

    5. Melt compounding of different grades polystyrene with organoclay. Part 3: Mechanical properties (pages 827–837)

      Shuichi Tanoue, Leszek A. Utracki, Andres Garcia-Rejon, Jacques Tatibouët and Musa R. Kamal

      Article first published online: 15 APR 2005 | DOI: 10.1002/pen.20336

    6. Study of self-crimp polyester fibers (pages 838–845)

      S.P. Rwei, Y.T. Lin and Y.Y. Su

      Article first published online: 15 APR 2005 | DOI: 10.1002/pen.20338

    7. Kinetic modeling of an unsaturated polyester resin using two complementary techniques: Near infrared spectroscopy and heat flux sensors (pages 846–856)

      Jerome Dupuy, Julien Adami, Abderahim Maazouz, Vincent Sobotka and Didier Delaunay

      Article first published online: 15 APR 2005 | DOI: 10.1002/pen.20340

    8. Comparison of injection molding machine performance (pages 857–865)

      A.L. Kelly, M. Woodhead and P.D. Coates

      Article first published online: 15 APR 2005 | DOI: 10.1002/pen.20335

    9. Experimental and numerical studies of injection molding with microfeatures (pages 866–875)

      Guojun Xu, Liyong Yu, L. James Lee and Kurt W. Koelling

      Article first published online: 25 APR 2005 | DOI: 10.1002/pen.20341

SEARCH

SEARCH BY CITATION