Polymer Engineering & Science

Cover image for Polymer Engineering & Science

November 2007

Volume 47, Issue 11

Pages 1715–1974

  1. Articles

    1. Top of page
    2. Articles
    1. Ultrasonic measurement of residual wall thickness during gas assisted injection molding (pages 1730–1739)

      E.C. Brown, L. Mulvaney-Johnson and P.D. Coates

      Article first published online: 28 SEP 2007 | DOI: 10.1002/pen.20832

    2. Synergistic effects of expandable graphite with magnesium hydroxide on the flame retardancy and thermal properties of polypropylene (pages 1756–1760)

      Xiaolang Chen, Hong Wu, Zhu Luo, Bo Yang, Shaoyun Guo and Jie Yu

      Article first published online: 28 SEP 2007 | DOI: 10.1002/pen.20867

    3. Eco-plastics: Morphological and mechanical properties of recycled poly(carbonate)-crushed rubber (rPC-CR) blends (pages 1768–1776)

      K. Zribi, K. Elleuch, J.F. Feller, A. Bourmaud and B. Elleuch

      Article first published online: 28 SEP 2007 | DOI: 10.1002/pen.20870

    4. Dynamic viscoelastic properties of fluoroelastomer/clay nanocomposites (pages 1777–1787)

      Madhuchhanda Maiti and Anil K. Bhowmick

      Article first published online: 28 SEP 2007 | DOI: 10.1002/pen.20877

    5. Anisotropic shrinkage of injection molded poly vinylidene fluoride samples (pages 1788–1795)

      V. Speranza, R. Pantani, G.B. Besana and G. Titomanlio

      Article first published online: 28 SEP 2007 | DOI: 10.1002/pen.20878

    6. Flexural and tensile moduli of polypropylene nanocomposites and comparison of experimental data to Halpin-Tsai and Tandon-Weng models (pages 1796–1803)

      Kyriaki Kalaitzidou, Hiroyuki Fukushima, Hiroaki Miyagawa and Lawrence T. Drzal

      Article first published online: 28 SEP 2007 | DOI: 10.1002/pen.20879

    7. Crosslinking of rotational molding foams of polyethylene (pages 1804–1812)

      A. Marcilla, J.C. García-Quesada, R. Ruiz-Femenia and M.I. Beltrán

      Article first published online: 28 SEP 2007 | DOI: 10.1002/pen.20880

    8. Thermal and mechanical degradation during polymer extrusion processing (pages 1813–1819)

      C. Capone, L. Di Landro, F. Inzoli, M. Penco and L. Sartore

      Article first published online: 28 SEP 2007 | DOI: 10.1002/pen.20882

    9. Poly(ethylene terephthalate) nanocomposite fibers with new organomica via in situ intercalation (pages 1820–1826)

      Min-Hye Jung, Jin-Hae Chang and Jeong-Cheol Kim

      Article first published online: 28 SEP 2007 | DOI: 10.1002/pen.20884

    10. A stochastic flow model for a tubular solution polymerization reactor (pages 1839–1846)

      Ardson dos S. Vianna Jr., Evaristo C. Biscaia Jr. and José Carlos Pinto

      Article first published online: 28 SEP 2007 | DOI: 10.1002/pen.20893

    11. Effect of melt processing conditions on the morphology and properties of nylon 6 nanocomposites (pages 1847–1864)

      F. Chavarria, R.K. Shah, D.L. Hunter and D.R. Paul

      Article first published online: 28 SEP 2007 | DOI: 10.1002/pen.20894

    12. Controllable fabrication and properties of polypropylene nanofibers (pages 1865–1872)

      Dong Wang, Gang Sun, Bor-Sen Chiou and Juan P. Hinestroza

      Article first published online: 28 SEP 2007 | DOI: 10.1002/pen.20896

    13. Mechanical properties of wollastonite-reinforced polypropylene composites modified with SEBS and SEBS-g-MA elastomers (pages 1873–1880)

      Iztok Švab, Vojko Musil, Ivan Šmit and Matjaž Makarovič

      Article first published online: 28 SEP 2007 | DOI: 10.1002/pen.20897

    14. Modification of epoxy resin by addition of bismaleimide and diallyl phthalate (pages 1881–1888)

      M.A. Shenoy, Mrinalini Patil and Aditya Shetty

      Article first published online: 28 SEP 2007 | DOI: 10.1002/pen.20901

    15. The effect of nanoclays on the nucleation, crystallization, and melting mechanisms of isotactic polypropylene (pages 1889–1897)

      F.J. Medellín-Rodríguez, J.M. Mata-Padilla, B.S. Hsiao, M.A. Waldo-Mendoza, E. Ramírez-Vargas and S. Sánchez-Valdes

      Article first published online: 28 SEP 2007 | DOI: 10.1002/pen.20902

    16. Extruded starch–nanoclay nanocomposites: Effects of glycerol and nanoclay concentration (pages 1898–1904)

      Bor-Sen Chiou, Delilah Wood, Emma Yee, Syed H. Imam, Greg M. Glenn and William J. Orts

      Article first published online: 28 SEP 2007 | DOI: 10.1002/pen.20903

    17. Comparison of vertical and horizontal slot die coatings (pages 1927–1936)

      Hsien-Ming Chang, Yu-Rong Chang, Chi-Feng Lin and Ta-Jo Liu

      Article first published online: 28 SEP 2007 | DOI: 10.1002/pen.20910

    18. Development of freeze flow apparatus to study filled polymer melts (pages 1937–1942)

      M.A. Beard, G.R. Tabor, S.J.K. Ritchie, K.E. Evans and R.I. Walton

      Article first published online: 28 SEP 2007 | DOI: 10.1002/pen.20911

    19. Influence of epoxy resin on the morphological and rheological properties of PBT/ABS blends compatibilized by ASMA (pages 1943–1950)

      Zengzeng Yao, Mei Lin, Jing Zhou, Haitao Wang, Wei Zhong and Qiangguo Du

      Article first published online: 28 SEP 2007 | DOI: 10.1002/pen.20913

    20. A short review on rubber/clay nanocomposites with emphasis on mechanical properties (pages 1956–1974)

      R. Sengupta, S. Chakraborty, S. Bandyopadhyay, S. Dasgupta, R. Mukhopadhyay, K. Auddy and A.S. Deuri

      Article first published online: 28 SEP 2007 | DOI: 10.1002/pen.20921

SEARCH

SEARCH BY CITATION