Polymer Engineering & Science

Cover image for Polymer Engineering & Science

December 2008

Volume 48, Issue 12

Pages 2289–2498

  1. Articles

    1. Top of page
    2. Articles
    1. Maleic anhydride/styrene melt grafting and crosslinking onto ethylene-octene copolymer (pages 2289–2296)

      Xiaolang Chen, Hong Wu, Jie Yu, Shaoyun Guo and Zhu Luo

      Article first published online: 24 OCT 2008 | DOI: 10.1002/pen.21071

    2. A robust shock and noise model for the manufacturing of molded LDPE foams (pages 2305–2316)

      S. Chedly, A. Chettah, H. Bonnefoy and M.N. Ichchou

      Article first published online: 24 OCT 2008 | DOI: 10.1002/pen.21168

    3. An optical investigation of high-tenacity polyester (H-T PET) fibers annealed at different temperatures (pages 2329–2334)

      H.M. El-Dessouky, M.R. Mahmoudi, K.M. Yassien and C.A. Lawrence

      Article first published online: 23 SEP 2008 | DOI: 10.1002/pen.21184

    4. Melting behavior and isothermal crystallization kinetics of nylon 11/EVOH/dicumyl peroxide blends (pages 2354–2361)

      Biaobing Wang, Zhengya Ding and Guosheng Hu

      Article first published online: 23 SEP 2008 | DOI: 10.1002/pen.21187

    5. The effects of spinning conditions on the morphology of electrospun jet and nonwoven membrane (pages 2362–2366)

      Ni Li, Xiao-Hong Qin, Ling Lin and Shan-Yuan Wang

      Article first published online: 24 OCT 2008 | DOI: 10.1002/pen.21188

    6. Preparation of nanocomposites based on PP and PA6 by direct injection molding (pages 2373–2381)

      Alberto Frache, Orietta Monticelli, Simona Ceccia, Alessandro Brucellaria and Antonio Casale

      Article first published online: 29 OCT 2008 | DOI: 10.1002/pen.21190

    7. Studies on epoxy blends modified with a hyperbranched polyester (pages 2382–2388)

      G. Cicala and G. Recca

      Article first published online: 24 OCT 2008 | DOI: 10.1002/pen.21192

    8. Control of morphology of sulfonated syndio-polystyrene membranes through constraints imposed by siloxane networks (pages 2389–2399)

      M. Lavorgna, L. Fusco, F. Piscitelli, G. Mensitieri, P. Agoretti, A. Borriello and L. Mascia

      Article first published online: 29 OCT 2008 | DOI: 10.1002/pen.21193

    9. Probing the viscoelastic properties of brominated isobutylene-co-p-methylstyrene rubber/tackifier blends using a rubber process analyzer (pages 2400–2409)

      K. Dinesh Kumar, Sanjiv Gupta, B.B. Sharma, Andy H. Tsou and Anil K. Bhowmick

      Article first published online: 24 OCT 2008 | DOI: 10.1002/pen.21195

    10. Use of carboxylated nitrile rubber and natural rubber blends as retreading compound for OTR tires (pages 2410–2417)

      Kaushik Pal, Tanya Das, Samir K. Pal and Chapal K. Das

      Article first published online: 24 OCT 2008 | DOI: 10.1002/pen.21196

    11. Effect of thermomechanical history on the crystallization of poly(ether-block-amide) (pages 2418–2425)

      Bruno Tavernier, Jan Mewis, Peter Van Puyvelde, Mikihito Takenaka, Benoît Ernst and Takeji Hashimoto

      Article first published online: 24 OCT 2008 | DOI: 10.1002/pen.21197

    12. Stretching-induced β-crystal of iPP: Influence of stretching ratio (pages 2454–2458)

      Chang-Yu Shen, Ying-Guo Zhou, Guo-Qiang Zheng, Chun-Tai Liu, Jing-Bo Chen and Qian Li

      Article first published online: 22 OCT 2008 | DOI: 10.1002/pen.21202

    13. The effect of clay dispersion on the properties of LLDPE/LLDPE-g-MAH/montmorillonite nanocomposites (pages 2459–2473)

      Karen Stoeffler, Pierre G. Lafleur and Johanne Denault

      Article first published online: 29 OCT 2008 | DOI: 10.1002/pen.21204

    14. Thermal conductivity of polymer nanocomposites made with carbon nanofibers (pages 2474–2481)

      Sushant Agarwal, M. Masud K. Khan and Rakesh K. Gupta

      Article first published online: 22 OCT 2008 | DOI: 10.1002/pen.21205

SEARCH

SEARCH BY CITATION