Polymer Engineering & Science

Cover image for Polymer Engineering & Science

September 2008

Volume 48, Issue 9

Pages 1655–1870

  1. Articles

    1. Top of page
    2. Articles
    3. Review Article
    4. Articles
    1. Morphology and glass transition of thin polylactic acid films (pages 1655–1660)

      A. Narladkar, E. Balnois, G. Vignaud, Y. Grohens and J.-F. Bardeau

      Article first published online: 25 JUL 2008 | DOI: 10.1002/pen.20957

    2. Electrospinning and alignment of polyaniline-based nanowires and nanotubes (pages 1661–1666)

      A. Attout, S. Yunus and P. Bertrand

      Article first published online: 27 DEC 2007 | DOI: 10.1002/pen.20969

    3. Natural rubber nanocomposite reinforced with nano silica (pages 1674–1677)

      Ying Chen, Zheng Peng, Ling Xue Kong, Mao Fang Huang and Pu Wang Li

      Article first published online: 25 JUL 2008 | DOI: 10.1002/pen.20997

  2. Review Article

    1. Top of page
    2. Articles
    3. Review Article
    4. Articles
    1. You have free access to this content
      Increasing the efficiency of the extrusion process (pages 1678–1682)

      Janusz W. Sikora

      Article first published online: 25 JUL 2008 | DOI: 10.1002/pen.20998

  3. Articles

    1. Top of page
    2. Articles
    3. Review Article
    4. Articles
    1. Multiscale roughness analysis in injection-molding process (pages 1725–1736)

      Maxence Bigerelle, Adrien Van Gorp and Alain Iost

      Article first published online: 25 JUN 2008 | DOI: 10.1002/pen.21131

    2. A simplified approach to predict part temperature and minimum “safe” cycle time (pages 1737–1746)

      Yunior Hioe, Keh-Chyou Chang, Konstantin Zuyev, Narayan Bhagavatula and Jose M. Castro

      Article first published online: 25 JUL 2008 | DOI: 10.1002/pen.21133

    3. In situ compatibilization of maleated thermoplastic starch/polyester melt-blends by reactive extrusion (pages 1747–1754)

      Jean-Marie Raquez, Yogaraj Nabar, Ramani Narayan and Philippe Dubois

      Article first published online: 25 JUL 2008 | DOI: 10.1002/pen.21136

    4. Chromophore concentration effect on holographic grating formation efficiency in novel azobenzene-functionalized polymers (pages 1755–1767)

      Ewa Schab-Balcerzak, Anna Sobolewska, Andrzej Miniewicz and Jan Jurusik

      Article first published online: 25 JUN 2008 | DOI: 10.1002/pen.21140

    5. Formation and characterization of polyurethane—vermiculite clay nanocomposite foams (pages 1778–1784)

      T. Umasankar Patro, G. Harikrishnan, Ashok Misra and Devang V. Khakhar

      Article first published online: 25 JUL 2008 | DOI: 10.1002/pen.21145

    6. Effect of molecular weight and end capping on poly(lactic-co-glycolic acid) ultrasound contrast agents (pages 1785–1792)

      J.R. Eisenbrey, O. Mualem Burstein and M.A. Wheatley

      Article first published online: 25 JUL 2008 | DOI: 10.1002/pen.21146

    7. In situ reactive compatibilization of aramid/polystyrene blends using amine-functionalized polystyrene (pages 1793–1800)

      Saima Shabbir, Sonia Zulfiqar, Zahoor Ahmad and Muhammad Ilyas Sarwar

      Article first published online: 25 JUL 2008 | DOI: 10.1002/pen.21147

    8. Water bamboo husk reinforced poly(lactic acid) green composites (pages 1833–1839)

      Kuo-Hsiung Wang, Tzong-Ming Wu, Yeng-Fong Shih and Chien-Ming Huang

      Article first published online: 25 JUL 2008 | DOI: 10.1002/pen.21151

    9. Prediction of residual stress and viscoelastic deformation of film insert molded parts (pages 1840–1847)

      Seong Yun Kim, Hwa Jin Oh, Sung Ho Kim, Chae Hwan Kim, Seung Hwan Lee and Jae Ryoun Youn

      Article first published online: 25 JUL 2008 | DOI: 10.1002/pen.21152

    10. Rheological characterization of starch derivatives/polycaprolactone blends processed by reactive extrusion (pages 1862–1870)

      Frédéric Bossard, Isabelle Pillin, Thierry Aubry and Yves Grohens

      Article first published online: 25 JUL 2008 | DOI: 10.1002/pen.21160

SEARCH

SEARCH BY CITATION