Polymer Engineering & Science

Cover image for Polymer Engineering & Science

September 2009

Volume 49, Issue 9

Pages 1671–1878

  1. Review Article

    1. Top of page
    2. Review Article
    3. Articles
    1. You have free access to this content
  2. Articles

    1. Top of page
    2. Review Article
    3. Articles
    1. Impact properties and microhardness of double-gated glass-reinforced polypropylene injection moldings (pages 1688–1695)

      Matias Martinez Gamba, António Sergio Pouzada and Patricia María Frontini

      Version of Record online: 13 APR 2009 | DOI: 10.1002/pen.21393

    2. Effect of clay/water ratio during bentonite clay organophilization on the characteristics of the organobentonites and its polypropylene nanocomposites (pages 1696–1702)

      Suédina M.L. Silva, Paolo E.R. Araújo, Kaline M. Ferreira, Eduardo L. Canedo, Laura H. Carvalho and Claudia M.O. Raposo

      Version of Record online: 27 APR 2009 | DOI: 10.1002/pen.21399

    3. Hydro-entangled bi-component microfiber nonwovens (pages 1703–1707)

      R.H. Gong and A. Nikoukhesal

      Version of Record online: 27 APR 2009 | DOI: 10.1002/pen.21400

    4. Analysis of the structure and mass transport properties of nanocomposite polyurethane (pages 1708–1718)

      C. Esposito Corcione, G. Mensitieri and A. Maffezzoli

      Version of Record online: 27 APR 2009 | DOI: 10.1002/pen.21410

    5. Physical aging of polycarbonate block copolymers: Ductility rejuvenation below the glass transition temperature (pages 1719–1726)

      Dibakar Dhara, A. Purushotham, Niles Rosenquist, William D. Richards, Krishna Maruvada and Gautam Chatterjee

      Version of Record online: 18 MAY 2009 | DOI: 10.1002/pen.21402

    6. Study on physical properties of multiwalled carbon nanotube/poly(phenylene sulfide) composites (pages 1727–1735)

      Defeng Wu, Lanfeng Wu, Weidong Zhou, Tao Yang and Ming Zhang

      Version of Record online: 18 MAY 2009 | DOI: 10.1002/pen.21403

    7. Peroxide-controlled degradation of polypropylene using a tetra-functional initiator (pages 1760–1766)

      Matthew J. Scorah, Shuihan Zhu, Alexander Psarreas, Neil T. McManus, Ramdhane Dhib, Costas Tzoganakis and Alexander Penlidis

      Version of Record online: 18 MAY 2009 | DOI: 10.1002/pen.21416

    8. Coating weight reduction by a carrier layer for tensioned-web slot coating (pages 1784–1792)

      Han-Chih Tsai, Hsien-Ming Chang and Ta-Jo Liu

      Version of Record online: 19 MAY 2009 | DOI: 10.1002/pen.21406

    9. An innovative method of die design and evaluation of flow balance for thermoplastics extrusion profiles (pages 1793–1799)

      Abbas Zolfaghari, Amir Hossein Behravesh, Ehsan Shakouri and Ehsan Soury

      Version of Record online: 19 MAY 2009 | DOI: 10.1002/pen.21421

    10. Optical properties of PMMA doped with erbium(III) and ytterbium(III) complexes (pages 1814–1817)

      Vaclav Prajzler, Ivan Huttel, Oleksiy Lyutakov, Jiri Oswald, Vladimir Machovic and Vitezslav Jerabek

      Version of Record online: 29 MAY 2009 | DOI: 10.1002/pen.21418

    11. Rotational molding cycle time reduction using a combination of physical techniques (pages 1846–1854)

      M.Z. Abdullah, S. Bickerton, D. Bhattacharyya, R.J. Crawford and E. Harkin-Jones

      Version of Record online: 29 JUN 2009 | DOI: 10.1002/pen.21260

    12. Fabrication of segmented cladding fiber by bicomponent spinning (pages 1865–1870)

      Julan Duan, Cuiqing Teng, Keqing Han, Muhuo Yu, Wenxuan Wu, Qijin Zhang and Kin Seng Chiang

      Version of Record online: 29 JUN 2009 | DOI: 10.1002/pen.21375

    13. Design and electrical conductivity of poly(acrylic acid-g-gelatin)/graphite conducting gel (pages 1871–1878)

      Qunwei Tang, Xiaoming Sun, Jihuai Wu, Qinghua Li and Jianming Lin

      Version of Record online: 17 JUL 2009 | DOI: 10.1002/pen.21409

SEARCH

SEARCH BY CITATION