Polymer Engineering & Science

Cover image for Polymer Engineering & Science

April 2010

Volume 50, Issue 4

Pages 643–856

  1. Articles

    1. Top of page
    2. Articles
    1. A knotted and interconnected skeleton structural model for predicting Young's modulus of binary phase polymer blends (pages 643–651)

      Jianfeng F. Wang, James K. Carson, Mike F. North and Don J. Cleland

      Article first published online: 24 NOV 2009 | DOI: 10.1002/pen.21592

    2. Melt rheology of HDPE/EVA blends: The effects of blend ratio, compatibilization, and dynamic vulcanization (pages 665–676)

      Biju John, K.T. Varughese, Zachariah Oommen and Sabu Thomas

      Article first published online: 28 DEC 2009 | DOI: 10.1002/pen.21568

    3. Effect of different fillers on physical, mechanical, and optical properties of styrenic-based thermoplastic elastomers (pages 677–688)

      Nursel Karakaya, Osman G. Ersoy, Mehmet A. Oral, Turgay Gonul and Veli Deniz

      Article first published online: 18 NOV 2009 | DOI: 10.1002/pen.21569

    4. Morphologies and mechanical properties of organic–inorganic multilayered composites (pages 689–696)

      Juan Li, Jinping Suo and Lintao Jia

      Article first published online: 22 OCT 2009 | DOI: 10.1002/pen.21571

    5. Dynamic optimization of semibatch vinyl acetate/acrylic acid suspension copolymerizations (pages 697–708)

      Fabricio Machado, Enrique Luis Lima and José Carlos Pinto

      Article first published online: 22 OCT 2009 | DOI: 10.1002/pen.21572

    6. Preparation and properties of blends from poly(3-hydroxybutyrate) with poly(vinyl acetate)-modified starch (pages 709–718)

      Trong-Ming Don, Cheng-Yu Chung, S.-M. Lai and Hsiu-Jung Chiu

      Article first published online: 28 DEC 2009 | DOI: 10.1002/pen.21575

    7. Dielectric properties of EVA/LDPE TPE system: Effect of nanosilica and controlled irradiation (pages 730–738)

      S. Hui, T.K. Chaki and S. Chattopadhyay

      Article first published online: 24 NOV 2009 | DOI: 10.1002/pen.21577

    8. Polyurethane tri-block copolymers—Synthesis, mechanical, elastic, and rheological properties (pages 747–755)

      Araichimani Arun, Kasper K.J. Baack and Reinoud J. Gaymans

      Article first published online: 30 NOV 2009 | DOI: 10.1002/pen.21579

    9. The melt rheological behavior of AB, ABA, BAB, and (AB)n block copolymers with monodisperse aramide segments (pages 756–761)

      Araichimani Arun, Konraad Dullaert and Reinoud J. Gaymans

      Article first published online: 24 NOV 2009 | DOI: 10.1002/pen.21581

    10. Reuse of natural fiber reinforced eco-composites in polymer mortars (pages 762–766)

      Anita Grozdanov, Maurizio Avella, Aleksandra Buzarovska, Gennaro Gentile and Maria E. Errico

      Article first published online: 20 JAN 2010 | DOI: 10.1002/pen.21582

    11. Selective migration in polyethylene/rubbery particles blends during capillary flow (pages 773–779)

      C. Chartier, L. Benyahia, J.-F. Tassin, H. Dang Ngoc and J.-F. Bardeau

      Article first published online: 23 DEC 2009 | DOI: 10.1002/pen.21584

    12. Shear properties of epoxy under high strain rate loading (pages 780–788)

      Niranjan K. Naik, Ravikumar Gadipatri, Narasimha Moorthy Thoram, Venkateswara Rao Kavala and Veerraju Ch.

      Article first published online: 20 JAN 2010 | DOI: 10.1002/pen.21585

    13. Extension rheology of liquid-crystalline solution/layered silicate hybrids (pages 789–799)

      Gleb B. Vasilyev, Veronika V. Makarova, Stephen J. Picken, Alexander V. Rebrov and Valery G. Kulichikhin

      Article first published online: 11 DEC 2009 | DOI: 10.1002/pen.21586

    14. Pressure control system for electrospinning process (pages 800–810)

      Charles J. Druesedow, Celal Batur, Miko Cakmak and Baris Yalcin

      Article first published online: 23 DEC 2009 | DOI: 10.1002/pen.21587

    15. An improved method for single fiber tensile test of natural fibers (pages 819–825)

      Wei Hu, Minh-Tan Ton-That, Florence Perrin-Sarazin and Johanne Denault

      Article first published online: 24 NOV 2009 | DOI: 10.1002/pen.21593

    16. Real time assessment of the compatibilization of polypropylene/polyamide 6 blends during extrusion (pages 826–834)

      Luís A. Pinheiro, Celina S. Bittencourt and Sebastião V. Canevarolo

      Article first published online: 24 NOV 2009 | DOI: 10.1002/pen.21594

    17. Thermally expandable microcapsules for polymer foaming—Relationship between expandability and viscoelasticity (pages 835–842)

      Yasuhiro Kawaguchi, Daichi Ito, Yoshiyuki Kosaka, Masazumi Okudo, Takeshi Nakachi, Hiroshi Kake, Jae Kyung Kim, Haruo Shikuma and Masahiro Ohshima

      Article first published online: 15 DEC 2009 | DOI: 10.1002/pen.21595

    18. Controlling the size and the stability of magnetic clusters formed in polyacrylamide hydrogels via cobalt-anionic fluoroprobe interactions (pages 843–850)

      Ali Gelir, Esra Alveroğlu, Mustafa Tulun, Yaşar Yılmaz and Hüseyin Sözeri

      Article first published online: 28 DEC 2009 | DOI: 10.1002/pen.21597

    19. Biobased chain extended polyurethane and its composites with silk fiber (pages 851–856)

      K.S. Manjula, M.N. Satheesh Kumar, Bluma G. Soare, Paulo Picciani and Siddaramaiah

      Article first published online: 30 NOV 2009 | DOI: 10.1002/pen.21604

SEARCH

SEARCH BY CITATION