Polymer Engineering & Science

Cover image for Polymer Engineering & Science

May 2010

Volume 50, Issue 5

Pages 857–1066

  1. Articles

    1. Top of page
    2. Articles
    1. Elastic modulus of viscoelastic magnetic silicone gel body (pages 857–862)

      Kazuhiko Matsumura and Hiroshi Yamaguchi

      Article first published online: 30 NOV 2009 | DOI: 10.1002/pen.21611

    2. Dissolution of waste plastics in biodiesel (pages 863–870)

      Ying Zhang, Surya K. Mallapragada and Balaji Narasimhan

      Article first published online: 24 NOV 2009 | DOI: 10.1002/pen.21598

    3. Structure, electrical and optical properties of (PVA/LiAsF6) polymer composite electrolyte films (pages 878–884)

      Madhu Mohan Varishetty, Weiliang Qiu, Yuan Gao and Wen Chen

      Article first published online: 30 NOV 2009 | DOI: 10.1002/pen.21437

    4. Effects of coagulation bath temperature and polyvinylpyrrolidone content on flat sheet asymmetric polyethersulfone membranes (pages 885–893)

      M. Amirilargani, E. Saljoughi, T. Mohammadi and M.R. Moghbeli

      Article first published online: 30 NOV 2009 | DOI: 10.1002/pen.21603

    5. Preparation and properties of HDPE/CaCO3/OMMT ternary nanocomposite (pages 894–899)

      Xin Dai, Qingkun Shang, Qiong Jia, Shichun Li and Yanhua Xiu

      Article first published online: 30 NOV 2009 | DOI: 10.1002/pen.21608

    6. Enhanced wear performance of nylon 6/organoclay nanocomposite by blending with a thermotropic liquid crystalline polymer (pages 900–910)

      Baoqing Zhang, Julia Shuk-Ping Wong, Richard Ching-Man Yam and Robert Kwok-Yiu Li

      Article first published online: 11 DEC 2009 | DOI: 10.1002/pen.21607

    7. Higher-molecular-weight hyperbranched polyethylenes containing crosslinking structures as lubricant viscosity-index improvers (pages 911–918)

      Shawn Morgan, Zhibin Ye, Ramesh Subramanian and Shiping Zhu

      Article first published online: 11 DEC 2009 | DOI: 10.1002/pen.21609

    8. Electrical characterization of the boron trifluoride doped poly(3-aminoacetophenone)/p-Si junction (pages 929–935)

      Fahrettin Yakuphanoglu and B. Filiz Şenkal

      Article first published online: 11 DEC 2009 | DOI: 10.1002/pen.21614

    9. Influence of solution properties on the roller electrospinning of poly(vinyl alcohol) (pages 936–943)

      Funda Cengiz, Tuan Anh Dao and Oldrich Jirsak

      Article first published online: 15 DEC 2009 | DOI: 10.1002/pen.21599

    10. Synthesis and antibiofouling properties of novel crosslinkable terpolymers containing semifluoroalkyl substituted aromatic side chains (pages 944–951)

      Shijun Feng, Yangen Huang, Qiang Wang, Yu Gao and Feng-Ling Qing

      Article first published online: 15 DEC 2009 | DOI: 10.1002/pen.21619

    11. Spherical calcium phosphate nanoparticle fillers allow polymer processing of bone fixation devices with high bioactivity (pages 952–960)

      Dirk Mohn, Duygu Ege, Kirill Feldman, Oliver D. Schneider, Thomas Imfeld, Aldo R. Boccaccini and Wendelin J. Stark

      Article first published online: 23 DEC 2009 | DOI: 10.1002/pen.21596

    12. Morphological, mechanical properties, and fracture behavior of bulk-made ABS resins toughened by high-cis polybutadiene rubber (pages 961–969)

      Zhisheng Yu, Yang Li, Yurong Wang, Li Yang, Ying Liu, Yongtian Li, Zhansheng Li and Zhongfu Zhao

      Article first published online: 23 DEC 2009 | DOI: 10.1002/pen.21600

    13. Preparation and properties of thermoplastic pea starch using N,N-bis(2-hydroxyethyl)formamide as the plasticizer (pages 970–977)

      Hongguang Dai, Peter R. Chang, Jiugao Yu, Xiaofei Ma and Peng Zhou

      Article first published online: 23 DEC 2009 | DOI: 10.1002/pen.21615

    14. Preparation and characterization of transparent PANI-SIO2 hybrid conducting films (pages 986–990)

      Li Wei, Qi Chen and Yingjun Gu

      Article first published online: 28 DEC 2009 | DOI: 10.1002/pen.21552

    15. Morphology of blends containing high concentrations of POSS nanoparticles in different polymer matrices (pages 991–999)

      Shuyan Li, George P. Simon and Janis G. Matisons

      Article first published online: 28 DEC 2009 | DOI: 10.1002/pen.21612

    16. Equal-channel multiangular extrusion of semicrystalline polymers (pages 1000–1006)

      V.A. Beloshenko, V.N. Varyukhin, A.V. Voznyak and Yu.V. Voznyak

      Article first published online: 20 JAN 2010 | DOI: 10.1002/pen.21613

    17. Modeling and analysis of post ejection wall deflections in products made out of polypropylene (pages 1007–1018)

      Horacio Ahuett-Garza, Francisco Aguiar and Victor Ponce

      Article first published online: 12 FEB 2010 | DOI: 10.1002/pen.21620

    18. Synthesis and properties of new aromatic copolyesters containing phosphorous cyclic bulky groups (pages 1028–1035)

      Tachita Vlad-Bubulac and Corneliu Hamciuc

      Article first published online: 24 FEB 2010 | DOI: 10.1002/pen.21616

    19. Crystallization and spherulitic growth kinetics of poly(trimethylene terephthalate)/polycarbonate blends (pages 1036–1046)

      Ez El Shafee, Halla F. Naguib, Longfei Li, Shichun Jiang and Lijia An

      Article first published online: 17 MAR 2010 | DOI: 10.1002/pen.21489

    20. Validating injection stretch-blow molding simulation through free blow trials (pages 1047–1057)

      G.H. Menary, C.W. Tan, C.G. Armstrong, Y. Salomeia, M. Picard, N. Billon and E.M.A. Harkin-Jones

      Article first published online: 17 MAR 2010 | DOI: 10.1002/pen.21555

    21. Constitutive modeling of rubberlike materials based on consistent strain energy density functions (pages 1058–1066)

      H. Darijani, R. Naghdabadi and M.H. Kargarnovin

      Article first published online: 30 MAR 2010 | DOI: 10.1002/pen.21605

SEARCH

SEARCH BY CITATION