Polymer Engineering & Science

© 2012 Society of Plastics Engineers

Cover image for Vol. 51 Issue 12

December 2011

Volume 51, Issue 12

Pages 2353–2577

  1. Articles

    1. Top of page
    2. Articles
    1. Effects of filler contents and processing parameters on the weldline strength of compression molded natural rubber (pages 2353–2359)

      S. Patcharaphun, W. Chookaew, T. Tungkeunkunt and N. Na-Ranong

      Article first published online: 15 APR 2011 | DOI: 10.1002/pen.22000

    2. Membrane color and gas permeability of 6FDA-TeMPD polyimide membranes prepared with various membrane preparation protocols (pages 2360–2369)

      Shinji Kanehashi, Shuichi Sato and Kazukiyo Nagai

      Article first published online: 13 MAY 2011 | DOI: 10.1002/pen.21986

    3. Improvement in toughness and crystallization of poly(L-lactic acid) by melt blending with poly(epichlorohydrin-co-ethylene oxide) (pages 2370–2380)

      Kunyu Zhang, Xianghai Ran, Xuemei Wang, Changyu Han, Lijing Han, Xin Wen, Yugang Zhuang and Lisong Dong

      Article first published online: 17 MAY 2011 | DOI: 10.1002/pen.22009

    4. Rheological properties of cotton pulp cellulose dissolved in 1-butyl-3-methylimidazolium chloride solutions (pages 2381–2386)

      Zhen Liu, Hui Wang, Zengxi Li, Xingmei Lu, Xiangping Zhang, Suojiang Zhang and Kebin Zhou

      Article first published online: 17 MAY 2011 | DOI: 10.1002/pen.22010

    5. Effect of nanoclay addition on the foaming behavior of linear polypropylene-based soft thermoplastic polyolefin foam blown in continuous extrusion (pages 2387–2397)

      Wentao Zhai and Chul B. Park

      Article first published online: 17 MAY 2011 | DOI: 10.1002/pen.22011

    6. Co-injection molding of immiscible polymers: Skin-core structure and adhesion studies (pages 2398–2407)

      M. Gomes, D. Martino, A.J. Pontes and J.C. Viana

      Article first published online: 17 MAY 2011 | DOI: 10.1002/pen.22012

    7. A general quantitative structure–property relationship treatment for dielectric constants of polymers (pages 2408–2416)

      Jie Xu, Lei Wang, Guijie Liang, Luoxin Wang and Xiaolin Shen

      Article first published online: 17 MAY 2011 | DOI: 10.1002/pen.22016

    8. Removal of methylene blue dyes from wastewater using cellulose-based superadsorbent hydrogels (pages 2417–2424)

      Yiming Zhou, Shiyu Fu, Hao Liu, Shaoping Yang and Huaiyu Zhan

      Article first published online: 21 MAY 2011 | DOI: 10.1002/pen.22020

    9. Morphology prediction and the effect of core-shell structure on the rheological behavior of PP/EPDM/HDPE ternary blends (pages 2425–2433)

      Lan-Peng Li, Bo Yin and Ming-Bo Yang

      Article first published online: 21 MAY 2011 | DOI: 10.1002/pen.22021

    10. On the differences in micro-deformation mechanism between isotactic polypropylene and β-nucleated isotactic polypropylene as revealed by the confocal laser scanning microscopy (pages 2434–2438)

      J. Jancar, J. Kalfus and R. Balkova

      Article first published online: 21 MAY 2011 | DOI: 10.1002/pen.22024

    11. Interpenetrating polymer network of blocked polyurethane and phenolic resin. II. Kinetic formation, swelling ratio, thermal properties, and flame retardance (pages 2439–2445)

      Chin-Hsing Chen

      Article first published online: 21 MAY 2011 | DOI: 10.1002/pen.22027

    12. Effect of extensional properties of polymer solutions on the droplet formation via ultrasonic atomization (pages 2446–2452)

      Yubin Kim and Hyungsu Kim

      Article first published online: 21 MAY 2011 | DOI: 10.1002/pen.22028

    13. Preparation and properties of porous poly(sodium acrylate-co-acrylamide) salt-resistant superabsorbent composite (pages 2453–2464)

      Zhenbin Chen, Fang Dong, Mingzhu Liu and Xiaohua Qi

      Article first published online: 21 MAY 2011 | DOI: 10.1002/pen.22034

    14. Effect of tackifiers on mechanical and dynamic properties of carbon-black-filled NR vulcanizates (pages 2465–2472)

      W. Thaijaroen

      Article first published online: 26 MAY 2011 | DOI: 10.1002/pen.22033

    15. Micellar polymerization, characterization, and viscoelasticity of combined thermally insensitive terpolyacrylamides (pages 2473–2482)

      Fátima Pérez Rodríguez and Enrique J. Jiménez-Regalado

      Article first published online: 31 MAY 2011 | DOI: 10.1002/pen.22015

    16. Styrene-assisted grafting of maleic anhydride onto isotactic poly butene-1 (pages 2483–2489)

      Yongxian Zhao, Yujie Ma, Wei Yao and Baochen Huang

      Article first published online: 31 MAY 2011 | DOI: 10.1002/pen.22032

    17. Elongation properties of polyethylene melts (pages 2490–2494)

      Ji-Zhao Liang and Lei Zhong

      Article first published online: 21 JUN 2011 | DOI: 10.1002/pen.22036

    18. Process modeling for the synthesis of unsaturated polyester (pages 2495–2504)

      M. Shah, E. Zondervan and A.B de Haan

      Article first published online: 21 JUN 2011 | DOI: 10.1002/pen.22038

    19. The supermolecular structure of isotactic polypropylene/atactic polystyrene blends (pages 2505–2516)

      Slawomir Borysiak

      Article first published online: 6 JUL 2011 | DOI: 10.1002/pen.22039

    20. Shrinkage alteration induced by segregation of glass beads in injection molded PA6: Experimental analysis and modeling (pages 2517–2525)

      J.G. Kovács

      Article first published online: 15 JUL 2011 | DOI: 10.1002/pen.22025

    21. Nonisothermal crystallization behaviors and conductive properties of PEO-based solid polymer electrolytes containing yttrium oxide nanoparticles (pages 2526–2534)

      Guijie Liang, Jie Xu, Weilin Xu, Xiaolin Shen, Zhikui Bai and Mu Yao

      Article first published online: 15 JUL 2011 | DOI: 10.1002/pen.22030

    22. Nonisothermal crystallization behavior of biodegradable poly(butylene terephthalate-co-butylene adipate-co-ethylene terephthalate-co-ethylene adipate) copolyester (pages 2535–2541)

      Xiaohui Wang, Jun Shi, Ying Chen, Yan Shi and Zhifeng Fu

      Article first published online: 25 JUL 2011 | DOI: 10.1002/pen.22019

    23. Improving the predictions of injection molding simulation software (pages 2542–2551)

      U. Vietri, A. Sorrentino, V. Speranza and R. Pantani

      Article first published online: 25 JUL 2011 | DOI: 10.1002/pen.22035

    24. Ultradrawing properties of ultrahigh-molecular weight polyethylene/functionalized carbon nanotube fibers and transmittance properties of their gel solutions (pages 2552–2563)

      Jen-Taut Yeh, Tsong-Wei Wu, Yu-Ching Lai, Qi-Cheng Li, Huo-Peng Zhou, Qin Zhou, Chi-Hui Tsou, Yao-Chi Shu, Chi-Yuan Huang and Kuo-Shien Huang

      Article first published online: 31 AUG 2011 | DOI: 10.1002/pen.22007

    25. Tensile properties of microbial β-glucan films (pages 2564–2570)

      Jiří Blahovec, Anna Hejlová, Jana Čopíková and Miroslav Novák

      Article first published online: 19 OCT 2011 | DOI: 10.1002/pen.22109

    26. Sheet bowing in thermoforming (pages 2571–2577)

      P.B. Vodak, A.W. Mix and A.J. Giacomin

      Article first published online: 23 OCT 2011 | DOI: 10.1002/pen.22029

SEARCH

SEARCH BY CITATION