Polymer Engineering & Science

Cover image for Polymer Engineering & Science

April 1965

Volume 5, Issue 2

Pages fmi–fmi, 68–67

  1. Masthead

    1. Top of page
    2. Masthead
    3. Articles
    4. Abstracts
    1. Masthead (page fmi)

      Article first published online: 4 NOV 2004 | DOI: 10.1002/pen.760050201

  2. Articles

    1. Top of page
    2. Masthead
    3. Articles
    4. Abstracts
    1. Resins and reinforced plastic laminates for continuous use at 650°F (pages 75–83)

      James H. Freeman, Lawrence W. Frost, George M. Bower and Edward J. Traynor

      Article first published online: 4 NOV 2004 | DOI: 10.1002/pen.760050203

    2. Effect of stearate processing aids upon polypropylene stability (pages 84–89)

      C. A. Russell

      Article first published online: 4 NOV 2004 | DOI: 10.1002/pen.760050204

    3. Heat-resistant epoxy-boroxine foams for high temperature applications (pages 90–100)

      H. H. Chen and A. C. Nixon

      Article first published online: 4 NOV 2004 | DOI: 10.1002/pen.760050205

    4. The effect of filler particle-size distribution in epoxy casting formulations (pages 101–104)

      H. W. Kuhlmann, F. W. Wolter and E. R. Mueller

      Article first published online: 4 NOV 2004 | DOI: 10.1002/pen.760050206

    5. Polyimides—new high temperature polymers: H-film, a polypyromellitimide film (pages 105–110)

      J. F. Heacock and C. E. Berr

      Article first published online: 4 NOV 2004 | DOI: 10.1002/pen.760050207

    6. The application of infrared spectrophotometry to the reactivity and cure state determination of epoxy resins (pages 111–116)

      J. Feltzin, D. M. Longnecker and Irvin Petker

      Article first published online: 4 NOV 2004 | DOI: 10.1002/pen.760050208

  3. Abstracts

    1. Top of page
    2. Masthead
    3. Articles
    4. Abstracts
    1. Abstracts of articles in this issue (pages 66–67)

      Article first published online: 4 NOV 2004 | DOI: 10.1002/pen.760050209

SEARCH

SEARCH BY CITATION