Advertisement

Rear side passivation of PERC-type solar cells by wet oxides grown from purified steam

Authors


Abstract

To considerably improve the conversion efficiency of industrial solar cells, the effective passivation of the rear surface is a prerequisite. Thermal grown silicon oxides provide an excellent level of surface passivation on lowly doped p-type surfaces. However, dry thermal oxidation processes require relatively high temperatures (∼1000°C) and, due to the low growth rate, long process times. To decrease both oxidation temperature and process time, the dry oxidation process can be replaced by a wet oxidation. The most common way to introduce high purity water vapor into the oxidation tube is the pyrolytic generation from high purity gases (H2 and O2). A more easy and cost effective option for the supply of water vapor that was applied within this work is the direct purification of steam. The passivation quality of dry and wet oxides, the latter grown from pyrolytic generated water vapor and purified steam was compared within this work. The passivation quality obtained for the wet oxides grown from purified steam was found to be comparable to those oxides grown from pyrolytic generated water vapor. On laser fired contacts (LFC) solar cells conversion efficiencies well above 20% could be achieved independent of the oxide that was applied for the rear side passivation. Copyright © 2010 John Wiley & Sons, Ltd.

Ancillary