Cu2ZnSnSe4 (CZTSe) thin film solar cells have been produced via co-evaporation followed by a high-temperature annealing. In order to reduce the decomposition of the CZTSe, a SnSe2 capping layer has been evaporated onto the absorber prior to the high-temperature treatment. This eliminates the Sn losses due to SnSe evaporation. A solar cell efficiency of 5.1% could be achieved with this method. Moreover, the device does not suffer from high series resistance, and the dominant recombination pathway is situated in the absorber bulk. Finally, different illumination conditions (white light, red light, and yellow light) reveal a strong loss in fill factor if no carriers are generated in the CdS buffer layer. This effect, known as red-kink effect, has also been observed in the closely related Cu(In,Ga)Se2 thin film solar cells. Copyright © 2013 John Wiley & Sons, Ltd.
If you can't find a tool you're looking for, please click the link at the top of the page to "Go to old article view". Alternatively, view our Knowledge Base articles for additional help. Your feedback is important to us, so please let us know if you have comments or ideas for improvement.