Alternating copolymer based on sulfonamide-substituted phenylmaleimide and vinyl monomers as polymer electrolyte membrane

Authors

  • Tomohiro Yasuda,

    Corresponding author
    1. Cooperative Research and Development Center, Yokohama National University, 79-5 Tokiwadai, Hodogaya-ku, Yokohama 240-8501, Japan
    • Tomohiro Yasuda, Cooperative Research and Development Center, Yokohama National University, 79-5 Tokiwadai, Hodogaya-ku, Yokohama 240-8501, Japan

      Masayoshi Watanabe, Department of Chemistry and Biotechnology, Yokohama National University, 79-5 Tokiwadai, Hodogaya-ku, Yokohama 240-8501, Japan

    Search for more papers by this author
  • Yukiko Okimura,

    1. Department of Chemistry and Biotechnology, Yokohama National University, 79-5 Tokiwadai, Hodogaya-ku, Yokohama 240-8501, Japan
    Search for more papers by this author
  • Arata Oishi,

    1. Department of Chemistry and Biotechnology, Yokohama National University, 79-5 Tokiwadai, Hodogaya-ku, Yokohama 240-8501, Japan
    Search for more papers by this author
  • Hisashi Kokubo,

    1. Department of Chemistry and Biotechnology, Yokohama National University, 79-5 Tokiwadai, Hodogaya-ku, Yokohama 240-8501, Japan
    Search for more papers by this author
  • Masayoshi Watanabe

    Corresponding author
    1. Department of Chemistry and Biotechnology, Yokohama National University, 79-5 Tokiwadai, Hodogaya-ku, Yokohama 240-8501, Japan
    • Tomohiro Yasuda, Cooperative Research and Development Center, Yokohama National University, 79-5 Tokiwadai, Hodogaya-ku, Yokohama 240-8501, Japan

      Masayoshi Watanabe, Department of Chemistry and Biotechnology, Yokohama National University, 79-5 Tokiwadai, Hodogaya-ku, Yokohama 240-8501, Japan

    Search for more papers by this author

Abstract

The alternating copolymerization of phenylmaleimide (PMI) with a pendant sulfonamide acid group (sa-PMI) and n-butyl vinyl ether (BVE) as the aliphatic vinyl monomer afforded proton-conducting polymer electrolytes—sa-PMI-BVEs—and their properties were compared with those of sa-PMI-STs that were synthesized from sa-PMI and styrene. The ion exchange capacities (IECs) can be easily controlled by partly replacing sa-PMI with unsubstituted PMI. sa-PMI-BVE is more flexible than sa-PMI-ST, and therefore, forms thin membranes even at high IECs, while sa-PMI-ST membranes are rigid and brittle. However, sa-PMI-BVE exhibits rather low thermal and oxidative stability. To realize polymer electrolyte membranes with reliable mechanical strength and a high IEC, gel-filled membranes were prepared by polymerization in the presence of a small amount of a crosslinker, divinylbenzene, in porous polytetrafluoroethylene membranes. By using the gel-filled membrane, H2/O2 fuel cells could be operated at 80 °C with reasonable performance. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013

Ancillary