If you can't find a tool you're looking for, please click the link at the top of the page to "Go to old article view". Alternatively, view our Knowledge Base articles for additional help. Your feedback is important to us, so please let us know if you have comments or ideas for improvement.
Myo-Inositol is commonly found in nature, particularly in soil. Various microorganisms, including soil bacteria, are able to grow on inositol as the sole source of carbon.1 These findings suggest that myo-inositol catabolism might be conserved among these different microorganisms, although the molecular genetics of the many genes involved have not yet been well characterized.1 In B. subtilis genome, the inositol catabolism pathway consists of several genes including iolI. The iolI gene (NCBI accession P42419) codes for a conserved 278-residue protein of unknown function that shows no sequence homology with proteins of known structure [cluster 2500 in PROTOMAP, www.protomap.cs.huji.ac.il]. Therefore, it was suggested that this protein may display a previously unobserved structural fold. There are sequence homologies to other structurally undetermined proteins, predominately from the B. subtilis family, including one in the inositol catabolism pathway (iolH). PSI-BLAST2 analysis revealed 335 sequence homologs of IolI in bacteria, archaea, and eukaryota (using inclusion threshold 0.005). As a part of the Midwest Center for Structural Genomics (MCSG) initiative (www.mcsg.anl.gov), we have determined the crystal structure of IolI protein at 1.6 Å resolution by using a semiautomated, high-throughput approach. After acquisition of the crystallographic data, structure solution and refinement were completed by using <6.5 h of CPU time. Rapid data acquisition and fast structure determination capabilities are essential components of the high-throughput structural genomics programs. Analysis of the IolI crystallographic structure, however, reveals that the protein adopts a beta-barrel (TIM) configuration3 [Fig.1(a)], suggesting structural homology to both endonuclease IV,4 a DNA repair enzyme, and xylose isomerase,5 a sugar-metabolizing enzyme (PDB accession 1QTW and 4XIS, respectively).
Materials and Methods.
The open reading frame of B. subtilis IolI protein was amplified from genomic DNA with Pfx DNA polymerase by using conditions and reagents provided by the vendor (Invitrogen, Carlsbad, CA). The gene was cloned into the pET30XaLIC (Novagen, Madison, WI) by using the Ligation Independent Cloning protocol.6 The resulting expression clone expressed a fusion protein with a thrombin-cleavable His-tag and a factor Xa-clevable S-tag. The selenomethionine (SeMet) derivative protein was overexpressed in E. coli BL21-Gold(DE3) (Stratagene) as in Ref. 9. The cells were lysed in binding buffer (300 mM NaCl, 5% glycerol, 50 mM Na phosphate, pH 8.0, 10 mM imidazole, and 10 mM β-mercaptoethanol) by sonication after the addition of lysozyme to 1 mg/mL and 1 mM PMSF. The lysate was clarified by centrifugation, passed through a 0.2-μm filter and applied to Ni-NTA Superflow resin (Qiagen). The protein was eluted from the column with 250 mM imidazole and dialyzed into thrombin cleavage/capture buffer A (20 mM Tris-HCl, pH 8.4, 0.15 mM NaCl, 2.5 mM CaCl2). The His-tag was cleaved from the protein by treatment with biotinylated thrombin by following the manufacturer's protocol (Novagen) The cleaved protein was then purified from the cleaved His-tag and uncleaved protein by passing the mixture through a Ni-NTA column. SeMet-labeled protein was purified by using identical protocol.
Crystals of SeMet-derivitized IolI protein were grown in hanging drops containing 1.50–1.75 M ammonium sulphate, 0.050 M Tris buffer, pH 8.00, 0.10 M sodium chloride, 1.0 mM ethylenediaminetetraacetic acid (EDTA), and 3.0 mM dithiothreitol (DTT). A single crystal of approximately 0.3 × 0.3 × 0.2 mm was cryoprotected by using 25% w/v sucrose made up in reservoir solution, and flash-frozen in liquid nitrogen. The crystal belonged to orthorhombic space group P21212, with cell dimensions a = 74.6 Å, b = 104.7 Å, c = 48.2 Å, α = β = γ = 90°. The absorption edge of Se was determined by using a fluorescence scan of the IolI crystal, followed by examination of the fluorescence data using CHOOCH.8 A three-wavelength MAD data set was collected in < 1 hour using the Structural Biology Center 19ID beamline of the Advanced Photon Source (APS), Argonne National Laboratory (ANL), and data were processed in near real time by using the HKL2000 suite.8 Diffraction data extended to 1.6 Å resolution. All six Se atoms in asymmetric unit were found by using SOLVE10 and CNS11 programs. The 1.6 Å MAD map produced by CNS was of superior quality and allowed autotracing of 276 residues with wARP12 and remaining two residues with QUANTA.13 Final refinement was completed by using CNS (annealing, water molecule identification, individual isotropic B refinement). The entire process of data processing, MAD phasing, autotracing, and refinement took a total of 6.5 h CPU time. Crystal characteristics, data collection, and structure solution results and structure refinement statistics are shown in Table I.
Table I. Summary of IolI Crystal Data, MAD Data Collection, and Refinement
Unit cell parameters (angstroms, degrees)
a = 74.29 Å, b = 104.77 Å, c = 48.42 Å, α = β = γ = 90
P 21212 (#18)
Molecular weight [278 residues (SeMet)]
Molecules per asymmetric unit (a.u.)
Selenomethionine residues per a.u.
Resolution limit (Å)
No. of unique reflections:
Overall data completeness (%)
Overall data redundancy
Overall Rmerge (%)
Figure of merit (FOM)
Resolution range (Å)
No. of reflections (all)
No. of reflections (observed)
Percent reflections observed
Overall R-value (%)
Free R-value (%)
RMSD from ideal geometry
No. of protein non-hydrogen atoms
No. of water molecules
Mean B-factor (Å2)
Ramachandran plot statistics (%)
Residues in most favored regions
Residues in additional allowed regions
Residues in generously allowed regions
Residues in disallowed region
IolI protein shows structural homology with E. coli endonuclease IV and xylose isomerase. All three proteins show a TIM barrel fold and bind metal ions. However, there are striking differences in the metal-binding pocket. Endonuclease IV binds three Zn+2 ions,4 whereas xylose isomerase binds two Mn+2 ions.5 To test the metal-binding properties of the IolI protein, crystals were soaked for 2 h in 2 mM ZnCl2 or 2 mM MnCl2. Single wavelength data sets were collected to 1.8 Å resolution. The resulting structures revealed a single Zn ion bound via residues Asp174, His177, His200, and Glu246 (Fig. 1, Table II). The apparent inability to bind Mn+2 ions suggests the metal-binding region of the IolI protein better resembles endonuclase IV catalytic site. However, IolI binds only one Zn ion (site 3) and apparently is unable to bind Zn at sites 1 and 2. The superposition of the two proteins shows that endonuclease IV's His69 residue coordinating Zn in site 1 has been replaced with Asn66 in IolI, whereas the Zn2 site has His231 replaced with Arg217. Analysis of the Zn3-binding site, however, shows that all four zinc-binding residues are preserved in both endonuclease IV and IolI; it is this site that actively binds a single zinc ion in IolI protein (Fig. 1). Therefore, introduction of just two mutations, His66→Asn and His217→Arg, can explain the lost of the Zn1 and Zn2 binding. The substitution of critical binding-pocket residues at zinc sites 1 and 2 suggest IolI may have a different biochemical function than endonuclase IV. In fact, among IolI sequence homologs, several sugar/alcohol-metabolizing enzymes are found such as hexulose-6-phosphate isomerase, sugar-phosphate isomerase, D-tagatose 3-epimerase, 4-hydroxyphenylpyruvate dioxygenase, hydroxypyruvate isomerase. Our data show that catalytic sites of proteins can undergo significant protein sequence modifications that alter the metal ion-binding properties. This may have significant role in evolution of protein function.
Table II. Comparison of Zinc-Binding Site Residues in E. coli Endonuclease IV and B. subtilis IolI
Endonuclease IV (E. coli)
IOLI (B. subtilis)
We thank all members of the Structural Biology Center at Argonne National Laboratory for their help in conducting experiments, Dr. Roman Laskowski for help with CATH analysis, and Lindy Keller for help in preparation of this manuscript.