SEARCH

SEARCH BY CITATION

LITERATURE CITED

  • 1
    Center for Chemical Process Safety, American Institute of Chemical Engineers, Community Response to Chemical Release Emergencies, Available at http://www.aiche.org/ccps/about/process-safety-faqs.
  • 2
    The Report of the BP U.S. Refineries Independent Safety Review Panel, 2007.
  • 3
    Occupational Safety and Health Administration (OSHA), Process Safety Management of Highly Hazardous Chemicals, Explosives and Blasting Agents, Final Rule, 29 CFR §1910.119, Washington, DC, February 24, 1992.
  • 4
    (a) American Chemistry Council, RCMS® Technical Specification, RC101.02, March 9, 2005; (b) American Chemistry Council, RCMS® Technical Specification Implementation Guidance and Interpretations, RC101.02, January 25, 2004; (c) American Chemistry Council, RCMS® Technical Specification Implementation Guidance and Interpretations Appendices, RC101.02, January 25, 2004.
  • 5
    U.S. Environmental Protection Agency, Environmental Management Systems, Available at http://www.epa.gov/oecaagct/tems.html.
  • 6
    Center for Chemical Process Safety (CCPS), Guidelines for Auditing Process Safety Management Systems, American Institute of Chemical Engineers, New York, 2007.
  • 7
    ISO 19011:2002, Guidelines on Quality and/or Environmental Management Systems Auditing, International Standard, International Organization for Standardization, Geneva, Switzerland, 2002.
  • 8
    US Chemical Safety and Hazard Investigation Board, Investigation Report, Refinery Explosion and Fire, BP Texas City Refinery, US Chemical Safety and Hazard Investigation Board, March 20, 2007.
  • 9
    Center For Chemical Process Safety (CCPS), Guidelines for Risk Based Process Safety, American Institute of Chemical Engineers, New York, 2007.
  • 10
    Part 1910, Occupational Safety and Health Standards, 29 Code of Federal Regulations.
  • 11
    ISO 19011:2002, Guidelines on Quality and/or Environmental Management Systems Auditing, International Standard, International Organization for Standardization, Geneva, Switzerland, 2002.
  • 12
    Center for Chemical Process Safety (CCPS), Guidelines for Auditing process Safety Management Systems, Wiley, New York, 2011.
  • 13
    CEFIC, Guidance on Process Safety Performance Indicators, 2nd Edition, 2011.
  • 14
    UK Health & Safety Executive, Developing Process Safety Indicators: A Step-by-Step Guide for Chemical and Major Hazard Industries, UK Health & Safety Executive, HSG254, 2006.
  • 15
    Organisation for Economic Co-operation and Development (OECD), Guidance on Developing Safety Performance Indicators, 2008.
  • 16
    Center for Chemical Process Safety (CCPS), Guidelines for Process Safety Metrics, American Institute of Chemical Engineers, New York, 2007.
  • 17
    9th Global Congress on Process Safety, San Antonio, TX, April 29–May 1, 2013.