SEARCH

SEARCH BY CITATION

Cited in:

CrossRef

This article has been cited by:

  1. 1
    Shaoyun Ren, Qi Zhang, Influence of concentration distribution of hydrogen in air on measured flammability limits, Journal of Loss Prevention in the Process Industries, 2015, 34, 82

    CrossRef

  2. 2
    Dong-Myeong Ha, The Study on Measurement and Prediction of Combustible Properties for Aniline, Journal of the Korean Institute of Gas, 2014, 18, 4, 44

    CrossRef

  3. 3
    Laurence G. Britton, Benjamin Keith Harrison, Using CHETAH to estimate lower flammable limit, minimum ignition energy, and other flammability parameters, Process Safety Progress, 2014, 33, 4
  4. 4
    Tingguang Ma, A thermal theory for flammability diagrams guiding purge and inertion of a flammable mixture, Process Safety Progress, 2013, 32, 1
  5. 5
    Tingguang Ma, Qingsheng Wang, Michael D. Larrañaga, Correlations for estimating flammability limits of pure fuels and fuel-inert mixtures, Fire Safety Journal, 2013, 56, 9

    CrossRef

  6. 6
    Laurence G. Britton, Jack A. Smith, Static Hazards of the VAST, Journal of Loss Prevention in the Process Industries, 2012, 25, 2, 309

    CrossRef

  7. 7
    Tingguang Ma, A thermal theory for estimating the flammability limits of a mixture, Fire Safety Journal, 2011, 46, 8, 558

    CrossRef

  8. 8
    J.R. Rowley, R.L. Rowley, W.V. Wilding, Estimation of the lower flammability limit of organic compounds as a function of temperature, Journal of Hazardous Materials, 2011, 186, 1, 551

    CrossRef

  9. 9
    S.P.M. Bane, J.E. Shepherd, E. Kwon, A.C. Day, Statistical analysis of electrostatic spark ignition of lean H2/O2/Ar mixtures, International Journal of Hydrogen Energy, 2011, 36, 3, 2344

    CrossRef

  10. 10
    Isaac A. Zlochower, Gregory M. Green, The limiting oxygen concentration and flammability limits of gases and gas mixtures, Journal of Loss Prevention in the Process Industries, 2009, 22, 4, 499

    CrossRef

  11. 11
    Horng-Jang Liaw, Chien-Tsun Chen, Chia-Chi Cheng, Ya-Ting Yang, Elimination of minimum flash-point behavior by addition of a specified third component, Journal of Loss Prevention in the Process Industries, 2008, 21, 1, 82

    CrossRef

  12. 12
    P. Mark L. Sandercock, Fire investigation and ignitable liquid residue analysis—A review: 2001–2007, Forensic Science International, 2008, 176, 2-3, 93

    CrossRef

  13. 13
    Laurence G. Britton, Kenneth L. Cashdollar, William Fenlon, David Frurip, John Going, B. Keith Harrison, Jeff Niemeier, Erdem A. Ural, The role of ASTM E27 methods in hazard assessment part II: Flammability and ignitability, Process Safety Progress, 2005, 24, 1
  14. 14
    Horng-Jang Liaw, Chia-Ling Tang, Jim-Shoung Lai, A model for predicting the flash point of ternary flammable solutions of liquid, Combustion and Flame, 2004, 138, 4, 308

    CrossRef

  15. 15
    A.G. Dastidar, P.R. Amyotte, Using Calculated Adiabatic Flame Temperatures to Determine Dust Explosion Inerting Requirements, Process Safety and Environmental Protection, 2004, 82, 2, 142

    CrossRef

  16. 16
    Laurence G. Britton, David J. Frurip, Further uses of the heat of oxidation in chemical hazard assessment, Process Safety Progress, 2003, 22, 1
  17. 17
    Laurence G. Britton, Using heats of oxidation to evaluate flammability hazards, Process Safety Progress, 2002, 21, 1
  18. 18
    References,