Get access

Effect of spray angle and spray volume on deposition of a medium droplet spray with air support in ivy pot plants

Authors

  • Dieter Foqué,

    Corresponding author
    1. Institute for Agricultural and Fisheries Research (ILVO), Technology and Food Science Unit, Agricultural Engineering, Merelbeke, Belgium
    • Correspondence to: Dieter Foqué, Institute for Agricultural and Fisheries Research (ILVO), Technology and Food Science Unit, Agricultural Engineering, Burg. Van Gansberghelaan 115, bus 1, 9820 Merelbeke, Belgium. E-mail: dieter.foque@ilvo.vlaanderen.be

    Search for more papers by this author
  • Jan G. Pieters,

    1. Ghent University, Department of Biosystems Engineering, Faculty of Bioscience Engineering, Gent, Belgium
    Search for more papers by this author
  • David Nuyttens

    1. Institute for Agricultural and Fisheries Research (ILVO), Technology and Food Science Unit, Agricultural Engineering, Merelbeke, Belgium
    Search for more papers by this author

Abstract

BACKGROUND

Spray boom systems, an alternative to the predominantly-used spray guns, have the potential to considerably improve crop protection management in glasshouses. Based on earlier experiments, the further optimization of the deposits of a medium spray quality extended range flat fan nozzle type using easy adjustable spray boom settings was examined. Using mineral chelate tracers and water sensitive papers, the spray results were monitored at three plant levels, on the upper side and the underside of the leaves, and on some off-target collectors. In addition, the deposition datasets of all tree experiments were compared.

RESULTS

The data showed that the most efficient spray distribution with the medium spray quality flat fan nozzles was found with a 30° forward angled spray combined with air support and an application rate of 1000 L ha–1. This technique resulted in a more uniform deposition in the dense canopy and increased spray deposition on the lower side of the leaves compared with the a standard spray boom application. Applying 1000 L ha–1 in two subsequent runs instead of one did not seem to show any added value.

CONCLUSION

Spray deposition can be improved hugely simply by changing some spray boom settings like nozzle type, angling the spray, using air support and adjusting the spray volume to the crop. © 2013 Society of Chemical Industry

Ancillary