Get access

Simulations of photocurrent improvement through combined geometric/diffracting light trapping in organic small molecule solar cells


Corresponding author: e-mail, Phone/Fax: +54 299 4488305


Although organic solar cells have recently shown remarkable high power conversion efficiencies approaching 12%, further improvements are needed to become a low cost alternative to current inorganic photovoltaic technologies. Optical losses due to insufficient light trapping, parasitic absorption in the contact layers and reflectance limit drastically the photocurrent delivered by these solar cells. In this work, we simulated two- (2D) and three-dimensional (3D) surface textures in the micro- and submicroscale to improve light trapping in optimized organic solar cells based on copper phtalocyanine (CuPc) and fullerene (C60). The analysis was carried out with the aid of the finite element method in 2D and 3D, taking into account interference as well as reflection and diffraction of the incident AM1.5 spectrum. At normal incidence, up to 23% improvement in the photocurrent over the planar cell was obtained. To investigate the texture performance under practical circumstances, we simulated 2D microstructures during a typical summer day, taking the change of incidence angle and radiation intensity into account. Results clearly show that all textured cells deliver more photocurrent than the planar cell, even at oblique angles. pssa201228637-gra-0001

The left illustration shows the simulation setup of the 2D geometry detailing the materials and simulation parameters. The right plot shows the calculated photocurrent improvement for 2D V-grooved cells and for 3D pyramid-shaped cells at normal incidence as a function of the aperture angle ϕ.